FLYPROFiber OM3 LC-to-LC Fiber Patch Cable — 50m Duplex, 10G/40G Ready, LSZH Jacket

FLYPROFiber OM3 LC-to-LC multimode patch cable, 50 meters, delivers low-loss, high-bandwidth fiber connections for 10G/40G/100G networks in data centers and enterprise environments.

This LC–LC OM3 multimode fiber patch cord from FLYPROFiber is built for high-density network runs where reliable, low-latency transmission matters. With a 50/125µm core/cladding profile, OM3 bandwidth, and factory-tested UPC-terminated zirconia ferrules, this cable supports 10 Gigabit and higher Ethernet links over short to medium distances while using a flame-retardant, low-smoke zero halogen (LSZH) jacket for safer installations.

How far can this OM3 LC-LC cable reliably transmit 10Gb and higher signals?

OM3 multimode fiber is optimized for short-range high-speed links. The FLYPROFiber 50M cable supports typical maximum reaches for popular Ethernet rates and includes a high modal bandwidth of 2000 MHz·km at 850 nm.

• 1Gb Ethernet up to about 550 meters at 850 nm.
• 10Gb Ethernet up to approximately 300 meters at 850 nm.
• 40Gb Ethernet up to ~300 meters and 100Gb up to ~200 meters at 850 nm (platform-dependent).
• Designed specifically for 10G SR, 10G LRM, SFP+ transceivers and similar short-range optics.

What physical features improve durability and performance in dense racks?

The cord uses 50/125µm fiber with quality cladding and precision-polished UPC ferrules to minimize insertion loss and reflections. Mechanical choices reduce bend sensitivity and make it suitable for crowded patch panels and SAN cabinets.

• 7.5 mm minimum bend radius to reduce microbending loss in tight routing.
• Insertion loss ≤0.3 dB and return loss ≥30 dB for stable signal integrity.
• Japan-made zirconia ceramic ferrules and UPC polish for precise alignment.
• Adjustable duplex clips and embossed A/B markers for quick Tx/Rx identification.

Which safety and installation conveniences are included?

FLYPROFiber balances performance with installer-friendly and safety-minded design choices. The jacket and labeling help keep deployments clean and simple while meeting modern building expectations.

• LSZH jacket reduces toxic smoke and halogen release in fire scenarios.
• Embossed A/B duplex clips and jacket tags labeled 1 & 2 for fast mapping and troubleshooting.
• Adjustable connector clips permit individual fiber access without removing the duplex housing.
• Each cable is factory-tested to ensure insertion loss and continuity before shipment.

Can this cable be used with my existing transceivers and patch panels?

Yes — LC duplex connectors and OM3 multimode specification make this patch cable compatible with common short-range optics and high-density panels. Verify your transceiver type and distance requirements before deployment for best results.

• Fits LC ports on transceivers, switches, and patch panels supporting multimode fiber.
• Recommended for SFP+, QSFP+ short-reach modules and similar optics labeled for OM3/850 nm.
• Available in lengths from 0.2 m to 200 m to match rack-to-rack or room-to-room runs.
• Use within specified distance limits to maintain advertised throughput and error rates.

Who this cable is for: IT managers, data center technicians, network integrators, and AV or campus infrastructure teams who need a dependable, lab-tested multimode fiber solution for 10Gb and higher links. Choose FLYPROFiber OM3 LC-LC patch cords when you require precise ferrule alignment, low insertion loss, LSZH safety, and clear duplex labeling for organized, high-density installations.