WORKMAN 3‑Pin Power Cord 12 AWG for CB & Ham Radios

WORKMAN CB3AXX is a heavy-duty 3-pin power cord with 12 AWG wiring and dual fuses, built to supply reliable DC power to CB and ham radio transceivers.

When powering mobile or base amateur radio equipment, the right cord reduces voltage drop, improves safety, and simplifies installation. The Workman CB3AXX combines thick 12-gauge conductors, a standard 3-pin radio plug, and fused protection on both positive and negative leads to offer a rugged, straightforward wiring solution for CB and ham operators. It’s designed for installations where sustained current, protection, and easy connection matter.

How does this cord protect my radio and vehicle electrical system?

The CB3AXX includes fused leads on both the positive and negative conductors so a single short circuit or wiring fault is less likely to damage your radio or vehicle wiring. Fused protection helps isolate problems quickly and can prevent excessive current from reaching sensitive electronics.

• 10 amp fuse on the positive lead for primary overcurrent protection
• 4 amp fuse on the negative lead to protect return path faults
• Both fuses are inline and replaceable for easy servicing
• 12 AWG wiring reduces heat and voltage drop under load

Will this cord handle high-current radios or long runs?

With 12 AWG wire and a 6-foot length, the CB3AXX is optimized for most mobile and close-proximity base setups. The thicker gauge minimizes voltage drop compared with smaller wire, making it suitable for higher current draw devices within typical vehicle or short-station distances.

• 12-gauge conductors for lower resistance and better current capacity
• 6-foot length balances reach and minimal voltage loss for most installs
• Ideal for radios drawing up to the included fuse ratings and moderate continuous loads
• Standard 3-pin plug fits common CB and ham radio power inlets

How easy is installation and maintenance?

The CB3AXX uses a standard 3-pin radio plug so it connects quickly to compatible transceivers without extra adapters. Inline fuse holders on both leads are accessible for inspection and replacement, and the cord’s robust construction withstands routine handling and installation in vehicles or shack environments.

• Standard 3-pin plug for quick, tool-free connection
• Inline, replaceable fuses simplify maintenance and troubleshooting
• Rugged jacket and stranded 12 AWG conductors resist wear from flexing
• No special wiring knowledge required for most users—follow manufacturer wiring diagrams

What components and specs should I verify before buying?

Match the Workman CB3AXX to your radio’s power inlet type and confirm the included fuse values meet your device’s requirements. Consider the length and gauge relative to your installation to ensure safe, efficient operation.

• Confirm your radio accepts a standard 3-pin power plug
• Verify 10 A (positive) and 4 A (negative) fuse values are appropriate
• Ensure a 6-foot cord length is sufficient for your layout
• Check that 12 AWG gauge matches your current draw and voltage drop needs

Who is this for? The WORKMAN CB3AXX is aimed at CB and amateur radio operators who want a reliable, ready-to-use power cord that prioritizes safety and low voltage drop. It suits vehicle-mounted installations, portable setups, and home radio shacks where a durable 6-foot cord, replaceable dual fuses, and a standard 3-pin plug make installation faster and safer. If you need longer runs or higher continuous current capacity, consider heavier-gauge wire or professional wiring modifications, but for common mobile and bench applications the CB3AXX is a practical, protective choice.