Anina T-Shape DC Cord Car Power Cable

The Anina T-Shape DC Cord is a 3-meter vehicle power cable with a built-in 15A cylindrical fuse and T-shaped connector designed to reliably power a wide range of YAESU, Kenwood, ICOM, Alinco, BTECH and AnyTone mobile radios from a car battery.

This heavy-gauge 14 AWG cable provides a durable, flexible feed from a vehicle’s 12V source to popular CB and ham radio head units. It eliminates the need to splice or jury-rig connections by offering a ready-made T-shape plug that matches many factory radio sockets, and the inline fuse adds a layer of circuit protection for safer installation and daily use.

How does this cable fit my mobile radio?

The Anina T-Shape DC Cord was made to match the power pinouts used by many common mobile radio models. Check your radio’s power socket or owner’s manual for a T-shaped DC plug specification; the cable supports a wide model list across YAESU, Kenwood, ICOM, Alinco, BTECH and AnyTone brands. If your radio accepts a T-shape connector and 12V input, this cable is likely compatible.

• Compatible YAESU models: FT-7800R, FT-7900R, FT-8900R, FT-2600 and several FT-series radios.
• Compatible Kenwood models: TM-741, TM-G707, TM-271, TM-281, TM-201/231 series and many TM-series radios.
• Compatible ICOM/Alinco/BTECH/AnyTone: common IC and DR series radios plus popular BTECH and AnyTone models.
• 14 AWG conductor suitable for typical mobile radio current draw.

What protection does the built-in fuse provide?

The cable integrates a 15A cylindrical fuse in-line with the positive lead to protect the radio and vehicle wiring from overloads and short circuits. This is a practical safety feature for mobile installations where accidental shorts or voltage spikes can occur. The fuse is user-replaceable so you can restore protection quickly if it ever blows.

• 15A fuse shields against excessive current draw and potential wiring damage.
• Fuse holder along the cable allows fast replacement without rewiring.
• Properly rated for most handheld and mobile CB/ham radio installations.
• Reduces risk of damage to radio electronics and vehicle electrical systems.

How easy is it to install and route in my vehicle?

With a 3-meter (approximately 10-foot) length and flexible 14 AWG wire, this cable offers generous reach from battery or fuse box locations to dash- or trunk-mounted radios. The T-shaped plug slips into compatible radio power sockets without splicing, and the cable jacket is designed for in-vehicle routing through grommets and along trim channels. Basic hand tools are usually all that’s needed for secure mounting.

• 3 m length provides flexible routing options in cars, trucks and vans.
• 14 AWG wire balances current capacity and bendability for neat runs.
• T-shape connector eliminates need for soldering or adapters on supported radios.
• Install with cable ties and existing grommets for a tidy finish.

Which radios and brands are listed as compatible?

The cable is specified to fit numerous models across major mobile radio manufacturers so you can match it to your setup with confidence. The listing includes many YAESU FT-series radios, a long list of Kenwood TM-series models, assorted ICOM business/mobile handsets, and select Alinco, BTECH, RADIODDITY and AnyTone units. Always verify the connector form factor on your radio before ordering.

• YAESU: FT-119, FT-7800R, FT-7900R, FT-8900R and other FT-series units.
• KENWOOD: TM-201, TM-231, TM-271, TM-741, TM-G707 and many more.
• ICOM and Alinco: common IC-F and DR series models listed in the compatibility table.
• Third parties: BTECH UV-series, RADIODDITY QB25 and AnyTone models.

Who is this for? The Anina T-Shape DC Cord is aimed at amateur radio operators, truckers, emergency communicators and vehicle installers who want a reliable, plug-and-play power cable for compatible mobile radios. It’s useful for anyone replacing a worn power lead, setting up a new mobile installation, or adding redundancy with a fused, heavy-gauge cable that makes routing and protection straightforward.