Winegard RV-7032 RV 12V Wall Plate with Coax Splitter

The Winegard RV-7032 is a brown flush wall plate that houses a 12V DC power supply with 75-ohm coax connections, a built-in 2-way splitter and an antenna/cable input switch for RV TV setups.

If you run television equipment in an RV, the RV-7032 provides a compact, in-wall solution to power an amplified antenna and feed one or two sets. The unit installs in a standard flush wall box and combines a +12 volt DC cigarette-lighter style outlet with coaxial input and output jacks, a polyfuse for protection and a selector that lets you choose between cable or RV antenna sources. It’s intended for use with Winegard amplified antennas and ships one per bag.

How does this wall plate simplify my RV TV wiring?

The RV-7032 consolidates power and signal connections into a single, low-profile wall plate so you avoid loose adapters and dangling power cords. It routes 75-ohm coax through a dedicated input and output while supplying 12V to an antenna amplifier through the built-in receptacle.

• One flush-mounted unit for both power and coax signal
• Built-in 2-way splitter to feed two TVs or one TV plus another coax device
• 12V cigarette-lighter receptacle for direct antenna amplifier power
• Polyfuse protection to reduce risk from short circuits

Can I switch between cable and antenna without rewiring?

Yes — the plate includes a manual input switch that selects either cable or the RV’s antenna as the signal source. This allows quick switching for different locations or when shore cable service is available, eliminating the need to change connections behind the wall.

• Front-access selector switch for cable vs. RV antenna
• No need to remove the plate to change signal source
• Keeps external cabling tidy and accessible

What protection and compatibility features should I expect?

The RV-7032 contains a polyfuse to help protect downstream devices and is rated for 12V DC operation, matching the voltage used by most amplified RV antennas. It is specifically designed to work with Winegard amplified antennas, ensuring compatibility and proper power delivery when used as directed.

• Polyfuse offers resettable overcurrent protection
• 12V DC rating compatible with standard antenna amplifiers
• 75-ohm coax connectors for industry-standard signal flow
• Sold as a single unit for one installation

How easy is installation and where should I place it?

Installation is straightforward for anyone familiar with RV electrical and low-voltage coax work. The plate fits a standard flush wall box; mount it near the TV location or where the antenna coax enters the vehicle to keep cable runs short and signal loss low.

• Designed for quick, in-wall installation in a standard box
• Place close to TV or antenna entry point to minimize coax length
• Follow manufacturer recommendations and safety guidelines during installation

Who is this for? The Winegard RV-7032 is aimed at RV owners and installers who want a neat, integrated wall-mounted solution for powering Winegard amplified antennas while distributing coax to one or two TVs. If you prefer a tidy interior finish, reliable 12V power delivery, and an easy cable/antenna selector, this wall plate offers a compact way to manage TV signal and amplifier power in recreational vehicles.