THE CIMPLE CO TV Antenna Amplifier Kit RG6 24dB

This THE CIMPLE CO TV Antenna Amplifier Kit is an indoor adjustable gain signal booster with RG6 coax, delivering up to 24 dB amplification for UHF, VHF and FM digital over-the-air reception.

Designed to strengthen an existing antenna feed, this compact distribution amplifier pairs a sturdy metal housing with a built-in gain control, power indicator, and two coax ports to optimize TV reception across ATSC, NTSC and FTA signals. The kit includes a high-quality RG6 coaxial cable so you can connect to a TV or splitter right away. Note: the amplifier improves signals that are already present; it cannot create reception where no broadcast reaches.

How does this amplifier improve indoor antenna reception?

By boosting the antenna’s output before the signal reaches your TV or splitter, the amplifier raises signal strength and helps reduce dropouts on weak but present channels. Adjustable gain control lets you dial in the optimal level to avoid overloading the tuner.

• Up to 24 dB adjustable gain to strengthen available signals
• Return-path support for CMTS and two-way setups
• Power indicator light shows active operation
• Minimizes distortion when set correctly

Will this work with my current antenna and TV setup?

The amplifier is compatible with indoor antennas using RG6 connections and supports VHF, UHF and FM bands for ATSC, NTSC and OTA signals. It works best when your antenna already receives some channels; it does not function as a long-range outdoor mast amplifier.

• Includes one amplifier and one RG6 coaxial cable for immediate use
• Works with single-antenna feeds before splitters for best distribution
• Indoor-only installation—keep the unit protected from weather
• Compatible with most digital and analog tuners supporting ATSC/NTSC

How should I install and set the amplifier for best results?

Place the amplifier between the antenna and your TV (or before a splitter), connect with the supplied RG6 cable, then power the unit and turn the gain up while scanning channels. Adjust gain down if channels overload or ghosting appears—small changes can noticeably affect reception.

• Connect amplifier to antenna first, then to TV or splitter
• Turn gain fully up, run a channel scan, then reduce if distortion occurs
• Maintain reasonable separation from other electronics to prevent interference
• Mount using built-in coax ports and place indoors in a ventilated area

What are the amplifier’s key features and limitations?

The unit offers rugged metal construction, a clear power light, two coax mounting ports, and a variable gain knob to tailor amplification. It cannot amplify signals that are not present at the antenna and is not rated for outdoor exposure.

• Solid metal housing for durability and heat dissipation
• Adjustable gain up to 24 dB for fine tuning reception
• Not suitable for outdoor installation—indoor use only
• Works best when installed before splitters and away from strong EMI sources

Who is this for: This THE CIMPLE CO kit is ideal for renters, apartment dwellers and homeowners with indoor antennas who receive some broadcast channels but want fewer dropouts, clearer picture, and the ability to distribute signal to multiple TVs. Choose this amplifier if you need an easy plug-and-play solution with adjustable gain and a supplied RG6 cable to get a cleaner OTA experience without altering your roofline or pulling new wiring.