THE CIMPLE CO RG6 Coaxial SDI Cable 125 ft — BNC to BNC, 75Ω, Weather-Resistant Jacket

This 125-foot THE CIMPLE CO RG6 coaxial cable with two male BNC connectors delivers reliable 75-ohm transmission for SDI, HD-SDI, CCTV, and high-speed internet applications.

Built to carry both digital and analog signals without excessive loss, this 125 ft (38 m) coaxial run combines an 18 AWG solid center conductor with aluminum braid shielding and a weather-resistant PVC jacket. The cable is swept to 3.0 GHz and rated for indoor and outdoor use, so it suits security camera installs, A/V systems, broadcast SDI links, and long-distance networking where consistent signal integrity matters.

How does this cable maintain a clean SDI or HD-SDI signal over long distances?

The cable’s design minimizes interference and attenuation across video frequencies. A solid 18 AWG center conductor gives low resistance, while multi-layer aluminum braid shielding reduces electromagnetic noise that would otherwise corrupt high-bandwidth signals.

• 75-ohm impedance engineered for SDI and broadcast standards
• Swept to 3.0 GHz to preserve high-frequency detail
• Aluminum braid and foil shielding for noise rejection
• Solid metal BNC connectors for secure mating and minimal signal loss

Can I install this cable outdoors and what protects it from weather?

The cable is jacketed in weather-stable PVC and ships with robust metal BNC connectors that tolerate exposure when routed outdoors. For permanent outdoor ground-level runs, combine with proper strain relief and sealing at connector points to maximize lifespan.

• Durable PVC outer jacket resists UV and moisture
• Weather-stabilized connectors to limit corrosion
• Suitable for wall, conduit, and eave routing with standard installation practices

Which devices and systems are compatible with THE CIMPLE CO RG6 125 ft cable?

This 75-ohm coax cable is versatile: it supports SDI/HD-SDI video, TV/CATV, CCTV, TVI, and many audio/video or networking applications that accept BNC terminations. It also carries high-speed internet and intranet signals where RG6 impedance is acceptable.

• HD-SDI and SDI cameras, recorders, and monitors
• CCTV and TVI surveillance systems
• Cable TV distribution and certain broadband connections
• Audio/video installations that require low-loss coax runs

How do I handle installation and what should I expect in performance?

Run the cable with gentle bends and avoid tight kinks to preserve the internal conductor and dielectric. Expect consistent picture and data throughput on properly terminated runs up to 125 feet; signal repeaters or active equipment may be required for longer distances or very high-bitrate feeds.

• Maintain bend radius to prevent micro-cracks or impedance changes
• Use correct BNC mating technique and hand-tighten connectors
• Consider amplifiers for runs beyond typical SDI length recommendations
• Test continuity and signal integrity after installation

Who is this product for? Installers, integrators, and DIYers who need a dependable, general-purpose 75-ohm coax run for video, surveillance, or distribution networks will find this 125-foot THE CIMPLE CO cable useful. It’s appropriate for residential and light-commercial projects that demand weather-tolerant cabling, solid shielding, and standard BNC connectivity without investing in specialty broadcast-only cable. If you need a long, affordable coax run that balances signal performance with outdoor readiness and easy BNC terminations, this cable meets those needs while remaining compatible with a wide range of SDI, TV, and CCTV gear.