Rythcraft Adhesive Zip Tie Mounts 50-Pack 1.5"

Rythcraft 50 Pack 1.5-inch adhesive zip tie mounts is a complete cable management kit that pairs 50 sticky base mounts with 50 eight-inch nylon zip ties for fast, secure routing of wires indoors or outdoors.

Messy cords can slow you down and make spaces look untidy. This kit combines 1.5 x 1.5-inch adhesive bases made with reinforced 3M adhesive and UL-grade PA66/nylon cable ties (8 inches long, 50 lb tensile strength) so you can organize power cords, network cables, speaker wires and small hoses without drilling. The materials are rated for -40°F to 185°F and resist UV and aging, making them suitable for workshops, home entertainment systems, offices and many outdoor uses.

How do these adhesive mounts hold up without screws?

The Rythcraft mounts use a reinforced 3M patented adhesive bonded to a fire-retardant PC base for strong adhesion on clean, dry surfaces. For extra security you can still use the screw hole on each mount when permanent fastening is needed.

• 3M reinforced adhesive for immediate stick-and-hold performance
• Optional screw hole (0.16" width) for mechanical fixing
• Hold surfaces must be cleaned and dried before application for best results
• Remove with heat (hair dryer) to avoid surface damage

Will the zip ties resist outdoor conditions and heat?

The included zip ties are made from certified UL nylon (PA66) designed for durability and aging resistance. They tolerate a wide temperature range and offer UV resistance so they won’t deform or become brittle quickly when placed outdoors or near heat sources.

• Tensile strength: approximately 50 pounds per tie
• Operating temperature range: -40°F to 185°F
• UL-grade nylon resists alkali, oil and UV exposure
• Reliable electrical insulation for cable runs

How easy is installation and later removal?

Installation is tool-free: peel the protective film from the adhesive base and press firmly for several seconds. For maximum bond strength wait 24 hours before loading. When you need to remove the mounts, warming the adhesive with a hair dryer softens the bond so the base can be peeled off cleanly.

• Press-hold the mount for best initial adhesion
• Wait 24 hours for full adhesive cure before adding strain
• Heat removal method prevents finish damage
• Also includes screw hole if you prefer permanent mounting

How many cables and uses do I get from one kit?

Each pack contains 50 adhesive mounts and 50 eight-inch zip ties—enough for many small-to-medium cable runs or dozens of point-fix routes. The compact 1.5-inch bases are suitable for single or bundled cables, and the adjustable zip ties can be tightened to secure varying diameters.

• 50 adhesive mounts (1.5 x 1.5 x 0.16 in each)
• 50 black 8" nylon zip ties (0.19" width, 0.04" thickness)
• Great for cable trays, entertainment centers, desks and garage walls
• Mix of adhesive-only and screw-fixed installations possible

Who is this for: The Rythcraft adhesive mount and zip tie kit is for DIY homeowners, IT and AV installers, office managers, and hobbyists who need a fast, tidy, non-destructive way to route cables. It’s especially useful where drilling is not allowed or where temporary, weather-resistant cable routing is required—like rented apartments, server closets, workshops, and exterior equipment runs.