PRUVEEO Smart ACC Hardwire Kit for Dash Cam

The PRUVEEO Smart ACC Hardwire Kit converts a vehicle's 12–30V supply into a stable 5V/3A feed so your mini USB or Type‑C dash cam can run 24/7 with parking‑mode monitoring and built‑in low voltage protection.

Install a reliable power source for your dash cam without cluttering the cigarette lighter port. This kit includes everything needed for a clean hardwire installation — fuse taps for common circuits, a Mini‑USB to Type‑C adapter, cable clips and an installation crowbar — and it supports a wide range of passenger and commercial vehicles that operate on 12–30V systems. The unit detects ACC (ignition) status to toggle normal recording and parking mode automatically, and it will cut power if your battery voltage drops to preserve starting charge.

How does this kit keep my dash cam recording while my car is parked?

The hardwire kit draws continuous power directly from the vehicle’s fuse box or battery, allowing the dash cam to stay powered after the engine is off. When the ACC signal indicates the engine is off, the kit switches the camera to parking mode so it can monitor events while parked without manual intervention.

• Direct connection to fuse box or battery for uninterrupted power
• ACC detection toggles between driving and parking modes automatically
• Includes fuse taps for common fuse types to simplify installation
• Works with mini‑USB and Type‑C dash cams via included adapter

Will this hardware protect my vehicle battery from draining?

Yes — the PRUVEEO hardwire kit features a smart low voltage protection circuit that stops supplying power when the car battery reaches a preset threshold, preventing deep discharge. The cutoff thresholds are set to preserve enough capacity so you can start the engine later.

• Automatic low voltage cutoff at ~11.8V (or 23.5V for higher voltage systems)
• Maintains enough battery reserve to start the vehicle after parking events
• Smart regulation avoids frequent restarts or battery damage
• LED indicator confirms correct installation and power status

What vehicles and dash cams are compatible with this hardwire kit?

The module accepts input voltages from 12V to 30V, making it suitable for most cars, trucks and vans. Output is regulated to 5V at up to 3A (also supports lower draws around 1A), so it can power virtually any mini‑USB or Type‑C dash cam, including multi‑channel systems.

• Input: 12V–30V DC — compatible with passenger cars and light commercial vehicles
• Output: 5V/3A (supports 1A devices as well) for reliable dash cam power
• Includes Mini‑USB to Type‑C converter for modern camera ports
• Packaged fuse taps cover the most common automotive fuse sizes

How difficult is the installation and what accessories are included?

The kit is designed for a tidy, OEM‑like install without cutting factory wires. It ships with multiple fuse tap cables, an installation crowbar, cable hiding clips and a port converter so you can route and secure the wiring behind trim and fuse panels.

• 8 fuse tap cables to fit common fuse positions and types
• Installation crowbar and cable clips for clean routing and concealment
• Mini‑to‑Type‑C adapter for dash cams with modern connectors
• LED indicator helps verify correct wiring at first power‑up

Who is this for? The PRUVEEO Smart ACC Hardwire Kit is aimed at drivers who want a permanent, low‑profile power solution for their dash cams — weekend commuters who need parking surveillance, rideshare or fleet drivers requiring continuous recording, and anyone seeking a safer battery management solution than leaving a camera plugged into a lighter adapter. It's also useful for installers and DIYers who want included hardware for a neat, fuse‑box integration without modifying factory wiring.