MOUNTUP Corner TV Wall Mount 26-65in Full Motion Arm

The MOUNTUP MU0057 is a heavy-duty corner TV wall mount that extends up to 30 inches, swivels and tilts, and fits most 26–65" TVs with VESA up to 400x400mm for secure long-arm placement.

This full-motion single-stud bracket is built to bring flexible viewing angles and strong support to living rooms, bedrooms, or corner installations. Engineered from cold-formed steel and tested for stability, the MU0057 balances reach and rigidity so you can pull your TV away from the wall, swivel it between rooms, and tilt to reduce glare while holding sets up to 77 lbs (35 kg). It includes a clear hardware kit and installation guide, while offering optional concrete anchors where needed.

How far will the arm reach and how compact is it when pushed back?

The MU0057 features a long dual-fold arm that extends a full 30 inches for viewing from multiple points in a room or between adjacent spaces. When you want a low-profile look, the arm folds back to about 2.6 inches from the wall to save space and keep the TV close to the surface.

• Maximum extension: 30 inches (76 cm) for broad viewing range
• Retracted depth: approximately 2.6 inches (6.6 cm) for compact storage
• Dual-fold arm design for flexible positioning and compact return

Will this mount fit my TV and allow movement for better viewing?

This bracket supports most flat, curved, LED and LCD TVs between 26 and 65 inches and up to 77 lbs, matching common VESA patterns from 100x100mm up to 400x400mm. It provides full-motion adjustment: wide swivel for side-to-side viewing, a modest tilt range to reduce reflections, and small post-install leveling for perfect alignment.

• VESA compatibility: 100x100mm to 400x400mm (4x4" to 16x16")
• Weight capacity: up to 77 lbs (35 kg)
• Movement: swivel ±90°, tilt +5°/−15°, level adjustment ±3°

How safe and stable is the MU0057 when the arm is fully extended?

Safety was prioritized in the design: heavy-duty cold-formed steel construction and reinforced joints help keep the TV stable even at full extension. Each mount undergoes strength testing to verify load capacity and secure hold, and the single-stud mounting plate is engineered to distribute stress appropriately when fastened to a strong stud or with supplied concrete anchors.

• Material: cold-formed steel for high rigidity and durability
• Tested load-bearing to ensure stability under full extension
• Concrete anchors available on request for non-stud installations

Is installation straightforward and what hardware is included?

The MU0057 is designed for a quick, three-step single-stud installation and comes with an illustrated instruction sheet and all necessary mounting hardware. Note that drywall alone cannot support this bracket—mount to a wood stud or masonry; concrete anchors (φ10x50mm) are provided if requested for secure masonry mounting.

• Included: mounting screws, bolts, washers, and installation guide
• Installation type: single-stud bracket; not for unsupported drywall
• Optional concrete anchors: φ10x50mm for masonry or block walls

Who is this for: The MOUNTUP MU0057 suits homeowners and renters who need a heavy-duty, versatile corner or wall mounting solution for mid-size to large TVs. It’s ideal for rooms where flexible sightlines matter—family rooms, open-plan spaces, bedrooms, or apartments with corner setups—and for anyone who wants a sturdy arm that both extends far and compresses neatly against the wall.