Mlxkell IR Emitter Extension Cable 1.5m 3.5mm (5pc)

The Mlxkell IR Infrared Emitter Extension Cable is a 1.5m 3.5mm-plug lead with a slim red emitter head that forwards IR signals at a +/-45° angle for remote control extension and centralized AV setups.

Designed for home theaters, AV racks and centralized control systems, this five-pack of Mlxkell IR emitter cables lets you place tiny infrared transmitters where your devices can receive commands while the source equipment remains hidden. Each cable is low-power, lightweight and fitted with a 3.5mm jack for plug-and-play connection to most IR distribution boxes, extenders and control modules.

How does the emitter cable extend remote control range?

The cable relays IR pulses from an IR distribution unit to the emitter head that transmits the signal to a device’s IR receiver. Because the head emits over a +/- 45° beam it covers the receiver area without requiring precise alignment, improving reliability in cabinets and behind walls.

• 1.5 m lead reaches into racks or behind displays.
• Red translucent emitter head for correct placement visibility.
• Low current drive to reduce power draw and heat.
• Works across standard 38–56 kHz consumer IR frequencies.

Where should I place the infrared head for best sensitivity?

Stick the emitter head close to the device’s IR receiver window—typically the dark red/translucent panel on the front. Avoid covering the head or placing it over the receiver component; the emitter must face the receiver without obstruction to ensure the remote commands register correctly.

• Locate the dark red or labeled IR area (R, IR, INF) on the device front.
• Use a flashlight to spot the receiver element behind the panel if needed.
• Peel and affix the emitter so it aligns beside, not over, the receiver tube.
• Keep the head free of tape or fabric that could block IR transmission.

Which equipment is this compatible with?

These emitters are intended for use with IR forwarding and extension equipment: IR blasters, distribution boxes, AV receivers with IR output, and remote wireless transceivers. The standard 3.5mm jack and support for 38–56 kHz signals make them compatible with most consumer AV and control systems.

• Connects to IR OUT / IR TX / IR EMITTER ports on extenders.
• Suitable for set-top boxes, receivers, Blu-ray players, and amplifiers.
• Ideal for centralized control panels and IR transceiver modules.
• Pack of five allows multiple device coverage or spares.

How durable and easy to install are these cables?

Constructed from plastic and metal components with a compact emitter head (15 x 8.5 x 6 mm), the cables are built for discreet installation and long-term use. The low-power design reduces stress on the emitter, and the sticky-mounted head simplifies placement in racks and behind panels.

• Compact emitter head fits tight spaces behind panels.
• 3.5mm plug for simple plug-and-play connection.
• Low power consumption for long service life.
• Five cables in one kit for multi-device setups or backups.

Who is this for: AV installers, home theater hobbyists and anyone hiding equipment in cabinets or behind walls who needs reliable remote control forwarding. The Mlxkell 1.5m IR emitter cables are practical for professional racks, smart-home control centers and DIY media furniture projects when you want unobtrusive IR control without rerouting devices.