MENGQI-CONTROL ANSI Failure-Secure Electric Strike Lock

The MENGQI-CONTROL ANSI failure-secure electric strike is a heavy-duty, stainless-steel door retention device that holds up to 1000 kg (2200 lbs) and remains locked when power is cut.

Built to meet demanding commercial and residential security needs, this electric strike is made from stainless steel, rated to DC 12V, and tested for one million cycles. It is designed to work with a variety of door types — wooden, metal, and PVC — and installs into metal frames with a drilled pocket for a clean, secure fit. The unit is fail-secure (remains locked during power loss), making it suitable where maintaining lock status during outages is required.

How strong is the holding force and what does it mean for door security?

The strike provides a holding force of 1000 kg (approximately 2200 lbs), giving a high resistance to forced entry on properly installed doors. That level of strength is suitable for high-traffic entry points and locations needing reinforced retention.

• Rated holding force: 1000 kg / 2200 lbs
• Constructed from stainless steel for corrosion resistance
• Suitable for heavy doors and frequent use

Will this work with my existing lock and how does installation look?

The electric strike is compatible with separate knob or mechanical locks, but those locks must be purchased and installed independently. It is intended for metal frames and requires drilling a pocket in the frame; once prepared, the strike installs directly into that opening.

• Works alongside standard knob and mechanical locks (locks sold separately)
• Requires metal frame with a drilled hole for pocket installation
• Designed for direct mounting into the frame for secure alignment

What are the electrical specs and reliability expectations?

The unit operates on DC 12V power and is engineered for long-term reliability, having been tested for up to 1,000,000 cycles. Because it is fail-secure, it maintains locking when electricity is interrupted, which is an important consideration for emergency and access-control planning.

• Voltage: DC 12V for common access-control systems
• Durability: testing up to 1,000,000 open/close cycles
• Fail-secure operation: stays locked if power is lost

What door types is this strike suitable for and any fit notes?

The strike is compatible with wooden, metal, and PVC doors when paired with the correct frame preparation and compatible locks. For optimal operation, ensure frame drilling and latch alignment follow ANSI-compatible dimensions so the strike and separate lock engage precisely.

• Compatible with wood, metal, and PVC door assemblies
• Requires frame modification (drilled pocket) in metal frames
• Verify latch alignment and ANSI-compatible sizing before install

Who is this for: installers, facility managers, and homeowners seeking a robust, fail-secure electric strike for commercial or heavy-duty residential doors will benefit most. Choose MENGQI-CONTROL if you need a stainless-steel, long-life strike rated for heavy holding force, frequent cycling, and a fail-secure response during power interruptions. Note: purchase and fit your door’s knob or mechanical locking mechanism separately to complete the access-control system.