CCCEI Recessed Power Strip 45W USB-C, AC Outlets

CCCEI's recessed power strip is a furniture-mounted charging station featuring a 45W PD USB‑C port, QC3.0 USB‑A fast charge, two grounded AC outlets, and a 6 ft 45° flat plug extension for tidy, hidden installation.

Keep cords out of sight and devices powered from nightstands, end tables, desks, or custom furniture without sacrificing fast charging. This recessed module fits a 4.9" x 1.7" cutout and requires approximately 1.45" of clearance beneath the surface. Built-in PD 3.0 and QC 3.0 protocols let compatible phones, tablets, and some laptops draw higher voltages when used individually while the ETL-listed housing and fire-resistant shell add safety for household use.

How fast will my devices charge with the USB‑C and USB‑A ports?

The USB‑C port supports PD 3.0 up to 45W when used alone, enabling faster charging for phones, tablets, and some ultrabooks. The QC 3.0 USB‑A ports offer up to 36W combined across their channels using standard QC voltage steps. When multiple ports are used simultaneously, output adjusts to device needs and follows the product's combined limits.

• USB‑C PD 3.0: 5V/3A, 9V/3A, 12V/3A, 15V/2.5A, 20V/2.25A (up to 45W).
• USB‑A QC 3.0 ports: 5V/3A, 9V/3A, 12V/3A (combined 36W max).
• When multiple USB ports are active, port outputs auto-adjust; single-port use enables top-speed charging.

Will it power larger devices like laptops or monitors?

The unit can supply power to some laptops that accept USB‑C PD input within the 45W range, and it has two grounded AC outlets for devices that require mains power. Verify your laptop's required wattage; higher-power laptops needing 60W or more may charge slowly or not reach full performance from the USB‑C port alone.

• AC output rating: 125V / 10A for two grounded outlets.
• USB‑C 45W suitable for many tablets and smaller laptops; check your device's PD requirements.
• Use AC outlets for higher-draw peripherals like monitors or larger chargers.

How do I install this recessed charging station into furniture?

Installation is designed for simple furniture retrofitting: trace a 4.9" x 1.7" cutout, ensure 1.45" clearance under the surface, and slide the module into the opening. The included 6 ft flat 45° plug extension lets you route power with minimal obstruction behind furniture and into wall outlets.

• Cutout (L x W): 4.9" x 1.7"; required under-surface depth: 1.45".
• Comes with a 6 ft 45° flat plug extension cord for low-profile placement.
• Test the strip operation after installation and secure per furniture material guidelines.

What safety protections and certifications are included?

The power strip carries ETL listing and uses a fire-resistant outer shell plus an internal safety system to protect connected equipment under normal household conditions. Always inspect the unit before use and avoid exposing it to moisture, excessive heat, or damage from impact.

• ETL listed for safety compliance in North America.
• Fire-resistant housing and built-in protection for overcurrent/short conditions.
• Follow manufacturer instructions and verify function before final installation.

Who is this for? Homeowners, furniture makers, and DIY renovators who want a low‑profile, fast‑charging solution built into bedside tables, desks, or living‑room furniture will find this CCCEI recessed power strip useful. It's aimed at people who value neat cable management, quick device top‑ups for phones and tablets, and the convenience of two grounded AC outlets—especially where a flat, low-profile extension cord makes behind‑furniture placement easier.