CCCEI Heavy Duty 20A Industrial Power Strip

The CCCEI Heavy Duty Power Strip is a 20-amp metal-housed surge protector and extension cord built for garages, workshops, and high-power tools that need safe, reliable multi-outlet power.

This industrial-style power strip combines a rugged metal enclosure, a 12-gauge 6-foot cord, and a 6-outlet layout that accepts larger plugs and T-slot appliances. Designed for demanding environments, it delivers 20A/125V capacity, a manual reset circuit breaker, and surge suppression rated to handle larger spikes. The unit is wall-mountable and includes a 6-20R T-slot adapter so you can connect both 15A and 20A plugs while observing the proper wattage limits on smaller circuits.

How does the CCCEI strip protect workshop equipment?

Protection comes from a combination of a 20A circuit breaker and surge suppression to reduce the risk from short-term voltage spikes. The breaker provides overload protection and can be manually reset after tripping, while the surge module absorbs transient surges common in workshop settings.

• 20A circuit breaker with manual reset to stop overloads
• Surge protection rated for larger spikes (1200J energy absorption)
• Metal housing to shield internals and support long-term use
• Suitable for most heavy-duty power tools when used within rated limits

Can I use this on a 15A outlet or only on 20A circuits?

This power strip accepts both 15A (5-15P) and 20A (6-20R) connections via the included T-slot adapter, but you must respect the available circuit capacity. When plugged into a 15A circuit do not exceed 1875 watts; on a 20A circuit the strip’s full 2500W capability can be used.

• Includes 6-20R T-slot adapter to accept 20A plugs
• Compatible with standard 5-15P outlets when adapter used
• Observe wattage limits on 15A circuits (max 1875W)
• Rated AC 20A, 125V, 60Hz, 2500W for correct wiring

What makes the outlet layout and construction ideal for a garage or shop?

The six outlets are widely spaced to accommodate bulky adapters and plugged-in power bricks without blocking adjacent sockets. The strip’s metal case, two mounting holes, and rugged 12 AWG cord are tailored for frequent use in garages, tool benches, and commercial work areas.

• Wide-spaced outlets for large plugs and adapters
• Durable metal housing that resists shop wear and tear
• Two hanging holes on the back for secure wall mounting
• 6-foot 12 AWG cord for reach and reduced voltage drop

How do I install and maintain this power strip safely?

Mount the strip securely to a wall or bench using the back hanging holes and keep it dry if used near outdoor doors or open workspaces. Periodically inspect the cord and housing for damage, reset the breaker if needed, and avoid daisy-chaining multiple power strips or exceeding rated loads.

• Mount using the two rear hanging holes for stability
• Inspect cord and plug regularly for nicks or frays
• Do not exceed 1875W on a 15A circuit; observe 2500W max on 20A circuits
• Avoid permanent outdoor exposure unless properly protected

Who is this for: The CCCEI 20A Heavy Duty Power Strip is aimed at homeowners, hobbyists, mechanics, and small commercial shops that need a dependable, high-amp multi-outlet solution. It’s a fit for anyone who runs bench tools, compressors, chargers, and appliances that require robust wiring and surge protection, while still offering the convenience of six widely spaced outlets and wall-mount capability.