CCCEI Heavy Duty 20A 8-Outlet Metal Power Strip

The CCCEI Heavy Duty 20A power strip is an industrial-grade 8-outlet metal surge protector with a 4 ft 12-gauge cord, 4800J surge suppression, and a 20A breaker for workshop and garage use.

Built for demanding environments, this bright yellow metal power strip combines high-current capacity with multiple outlet types so you can run shop tools, appliances, and test equipment safely from a single mounted unit. Its 12 AWG, 4-foot cord and included 6-20R T-slot adapter let you connect to either a 15A or 20A receptacle (observe load limits on 15A circuits). The unit also features surge suppression, an on/off reset switch, and a sturdy wall-mount design intended for garages, workshops, and industrial spaces.

How does this power strip protect my tools and electronics?

The CCCEI strip includes 4800 joules of surge suppression to absorb larger voltage spikes and a 20A circuit breaker that trips on overloads to prevent overheating. The resettable on/off switch restores power after events, and the metal casing helps disperse heat during heavy use.

• 4800J surge protection rating for strong transient absorbance
• Resettable on/off switch with integrated 20A circuit breaker
• Metal enclosure improves durability and heat management
• Overload protection reduces risk during prolonged high-current use

Can I use it with both 15A and 20A outlets?

Yes—this power strip ships with a standard 5-15P three-prong plug and a 6-20R T-slot adapter so you can plug into either 15A or 20A circuits. When connected to a 15A receptacle, do not exceed the 1875W limit to avoid tripping the breaker or overloading the circuit.

• Includes 5-15P plug and 6-20R T-slot adapter for flexible connections
• Rated AC 20A at 125–220V; 2500W continuous capacity on a 20A circuit
• When on a 15A supply, keep load under 1875W to comply with safety limits
• 4 ft 12 AWG cord minimizes voltage drop for nearby tool benches

What makes it suitable for a garage or workshop?

The strip is tailored for workshop demands: robust 12-gauge wiring handles sustained high-current draw, eight outlets accommodate multiple devices, and the bright yellow finish improves visibility in busy spaces. Wall-mount slots let you secure it to a workbench or shop wall to keep cords organized and protected from floor hazards.

• 12 AWG, 4-foot cord for sustained heavy-load applications
• Eight grounded outlets to power multiple tools and chargers
• Wall-mountable metal body for secure, out-of-the-way installation
• High-visibility yellow paint helps prevent accidental impacts

How should I install and care for the power strip?

Mount the unit to a stable surface using the built-in mounting points, avoid using it outdoors unless properly protected from moisture, and periodically inspect the cord and housing for wear. If the breaker trips or surge indicator shows a problem, unplug connected devices, correct the issue, and use the reset switch when appropriate.

• Secure with screws through wall-mount brackets on a stable surface
• Keep the strip dry; protect from outdoor exposure and water
• Check cord and outlets for damage before repeated heavy use
• Use the reset switch after overloads or to restore protection after surges

Who this is for: This CCCEI 20A heavy duty power strip is aimed at tradespeople, hobbyists, and small-shop owners who need a durable, high-current central power station for bench tools, compressors, chargers, and appliances. Choose it if you require multiple grounded outlets, a short robust cord for nearby equipment, and built-in surge and overload protection. If you need outdoor-rated equipment or longer reach, consider a model specifically listed for exterior use or with a longer heavy-gauge cord.