BOSS Audio Systems 8" P80DVC Phantom Series Car Subwoofer

Powerful, compact 8" subwoofer by BOSS Audio Systems that delivers deep low-end with 1000W peak (500W RMS) and a dual 4-ohm voice coil for flexible wiring to your amp.

The BOSS Audio Systems P80DVC Phantom Series 8-inch subwoofer is built to add tight, impactful bass to car audio systems without taking up much space. Its treated paper cone and rubber surround prioritize controlled movement and punchy response, while the aluminium voice coil helps with heat dissipation during sustained use. With a frequency response centered for low-frequency performance and a sensitivity rating that balances output and efficiency, this driver is suited for compact enclosures and sealed or ported setups when matched to the right amplifier.

How loud and deep will this 8" subwoofer play in a typical car?

You can expect robust bass for its size: the P80DVC is rated at 1000 watts peak and 500 watts RMS, with a frequency response down to about 42 Hz. It’s intended to reproduce punch and mid-bass rather than the lowest organ tones you’d get from larger subs.

• 1000W peak / 500W RMS handling for strong transient and continuous power
• 42 Hz frequency response captures mid-to-low bass effectively
• 88 dB sensitivity gives good output with moderate amplifier power
• Best in small sealed boxes or compact ported enclosures

What wiring options and amp connections does the dual 4-ohm voice coil provide?

The dual 4-ohm voice coil (DVC) lets you wire the subwoofer in parallel or series to achieve different final impedances, making it easier to match common amplifier outputs. This flexibility helps when you need to run one sub on a mono amp or combine multiple subs on multi-channel rigs.

• Parallel wiring yields 2 ohms total for higher current/greater output
• Series wiring yields 8 ohms for high-impedance amplifier compatibility
• Works well with mono amps rated for 2–4 ohms or multi-channel bridged setups
• Cable- and terminal-friendly design for straightforward hook-up to an amp

What materials and build details affect sound and durability?

Construction features such as the treated paper cone, rubber surround and aluminium voice coil influence the P80DVC’s tonal character and longevity. These materials aim to combine responsiveness with resistance to environmental stress inside a vehicle.

• Treated paper membrane for balanced transient response and natural tone
• Durable rubber base/surround for controlled excursion and long life
• Aluminium voice coil for improved heat dissipation under load
• Rigid basket and gasket for secure mounting and minimal vibrations

How should I choose an enclosure and amplifier for best results?

Match the sub to an amp that can provide the RMS rating without clipping, and choose an enclosure that complements the 42 Hz response. Sealed boxes give tight, accurate bass in limited space; small ported boxes increase output around the tuning frequency.

• Amp: aim for a mono amplifier delivering around 400–600W RMS at the chosen impedance
• Sealed enclosure: compact, tighter transient response, best for small cars
• Ported enclosure: greater output near tuning, needs more space and correct tuning
• Proper wiring (parallel/series) to match amp impedance and stability

Who this unit is for: The BOSS P80DVC Phantom 8" subwoofer suits drivers who want stronger bass from a compact driver—commuters, compact-car owners, or anyone with limited trunk space who still wants impactful, punchy low end. It’s also a good pick for installers and hobbyists who need flexible wiring options and a reliable small sub for sealed or modestly ported enclosures. Pair it with an appropriately rated amplifier and a well-built box to unlock clean, powerful low-frequency performance.