BESCOOS PowerCon 14AWG Shielded 10ft AC Power Cable

BESCOOS Toronce SAC3FCA to SAC3FCB is a hand-built 10-foot PowerCon power cable using 14 AWG shielded copper conductors, engineered to deliver reliable AC power to LED screens, stage moving-head lights, speakers and other pro-audio/video fixtures.

This heavy-duty extension combines a locking PowerCon NAC3FCA inlet with a NAC3FCB outlet on a 10-foot jacketed cable built from 14 AWG shielded RVVP copper. It’s designed for temporary installs, touring rigs, and fixed AV setups where a secure, low-resistance connection and mechanical strain relief are essential. The robust connectors and shielded construction help reduce electrical noise while the length and gauge support most LED panels, beam fixtures, and powered stage equipment.

What devices will this 14 AWG PowerCon cable power safely?

This cable is suited for mid-power professional fixtures that accept PowerCon connectors, including LED display panels, moving-head lights, powered speakers, and stage effects. It is not for permanently hard-wired mains or devices that exceed the cable’s current capacity.

• PowerCon NAC3FCA (inlet) to NAC3FCB (outlet) locking connectors for secure mains connections
• 14 AWG / 3 × 2.08 mm² copper conductors for reliable current carrying
• Shielded RVVP construction reduces electromagnetic interference with audio/video signals
• 10-foot length provides flexible placement without excessive slack

How does the shielding and 14 AWG construction benefit live events?

The shielded RVVP cable and thicker 14 AWG conductors lower voltage drop over the run and help protect sensitive audio/video circuits from interference during performances. That yields steadier lamp output and cleaner audio/visual performance under stage conditions.

• Reduced voltage drop keeps LED brightness and fixture performance consistent
• Shielding blocks RF and EMI that can cause flicker or audio hum
• 14 AWG gauge supports higher continuous current than thinner leads
• Robust jacket resists abrasion and stage-wear during setups and strikes

How do the PowerCon connectors improve setup reliability?

PowerCon connectors lock with a twist-action latch to prevent accidental unplugging in high-traffic or rigged environments. The hand-built assembly with quality strain relief reduces connector failure from repeated bending and movement.

• NAC3FCA inlet mates with NAC3FCB outlet for a captive, vibration-resistant connection
• Solid copper terminations minimize contact resistance at the connector
• Mechanical strain relief protects solder joints and conductor ends
• Clear gender marking simplifies quick and correct hookups on stage

What should I check before using this cable in my rig?

Confirm the fixture accepts PowerCon connectors and that the combined current draw at 120/230 V remains within 14 AWG limits. Inspect connectors and jacket for damage before each use and avoid daisy-chaining beyond recommended current and safety guidelines.

• Verify fixture inlet type: NAC3FCA/NAC3FCB compatibility
• Calculate total current draw to ensure it’s within safe cable ampacity
• Inspect for cuts, exposed wires, or loose connector fittings before powering
• Use qualified power distribution for permanent installations

Who is this for: AV technicians, touring crews, lighting designers, rental houses and venue engineers who need a dependable, mid-length PowerCon extension that balances flexibility, durability and electrical performance. It’s an excellent choice when you require a secure, shielded power connection for LED screens, moving head lights, powered speakers and other pro-AV equipment in live event, studio or rental environments.