YTAIMITOP OBD2 to USB-C Dash Cam Power Cable — LED Voltmeter, 12V-24V to 5V/3A, 4-Level Low Voltage Protection

Overview

Power your dash cam reliably with the YTAIMITOP OBD2 to USB-C power cable. This plug‑and‑play solution converts a vehicle’s OBD2 port into a stable 5V/3A USB‑C supply, keeping your dash cam ready for driving, parking, and timelapse capture. The integrated LED voltmeter gives you real‑time insight into your battery health, while smart protections help prevent unnecessary battery drain so you can focus on the road.

Key Benefits

• Plug‑and‑play convenience: Simply connect the OBD2 end to your vehicle and the USB‑C end to your dash cam or USB‑C device—no wiring or fuse box work required.
• Real‑time voltage display: A built‑in LED screen shows the car battery voltage at a glance, helping you monitor electrical health on the go.
• Versatile power output: Accepts 12V–24V input and delivers a stable 5V/3A output for most USB‑C dash cams, GPS units, and radar detectors.
• Smart protection: Four‑level low‑voltage cutoffs (11.6V / 11.9V / 12.5V / 20 minutes) guard against battery drain while keeping enough reserve to start the engine.
• Parking mode ready: 24/7 monitoring with ACC auto switch keeps the camera powered during parking while limiting power use when needed.

What You Get

• OBD2 to USB‑C power cable (3.5 m / 11.5 ft) for flexible vehicle routing
• One pry tool and four wire ties for tidy installation
• Built‑in fuse and multiple protections to safeguard both dash cam and vehicle

Installation Tips

Note the 20‑minute timer mode: the power may cut off 20 minutes after the vehicle stops. If not compatible with your dash cam, confirm time‑lapse parking recording support and ACC signal alignment (A5‑B5 vs. A8‑B8). The USB‑C connector uses A5‑B5 pins, which may differ from some brands.

Compatibility & Real‑World Use

Designed for 12V‑24V systems, this kit powers USB‑C dash cams, GPS units, and radar detectors. The 90° angled USB‑C plug helps install in tight spaces, while the long 11.5 ft cable keeps cables organized under dashboards or across consoles. Real‑world scenarios include city commutes, highway flights, and long road trips where continuous power and battery awareness matter.