Your Cable Store 100ft 1/4-inch Stereo Headphone Extension

This is a 100-foot, 24 AWG 1/4" (6.3mm) stereo headphone extension cable that extends 1/4" headphone or line-level connections for instruments, DJ rigs, and home audio setups.

If you need to place headphones, an amplifier, mixer, or instrument farther from your source, this long stereo extension gives you flexible reach without rewiring gear. Built with 24 AWG conductors and standard 1/4-inch stereo male and female connectors, the cable preserves left/right stereo channels and supports line-level audio for stage, studio, and home use. It’s designed to bridge distance between devices while keeping a clean, single-cable run.

How does this cable keep stereo signal quality over 100 feet?

Long cable runs can introduce resistance and noise, but 24 AWG conductors strike a balance between flexibility and low signal loss for line- or headphone-level audio. The cable maintains stereo separation with dedicated conductors for left and right channels and a shared ground, helping minimize interference when routed properly.

• 24 AWG conductors for reduced resistance across long runs
• Dedicated left/right conductors plus ground for clear stereo imaging
• Shielding and jacket help limit external noise pickup when laid away from power sources

What equipment works with a 1/4" stereo extension cable?

This extension is compatible with any device that uses a standard 1/4" (6.3mm) stereo plug. Typical uses include extending headphone cables, connecting stage monitors, routing DJ headphones to a booth, or linking line-level out to a processor without relocating bulky gear.

• Headphones and headphone amplifiers with 1/4" jacks
• Mixers, DJ controllers, and audio interfaces with quarter-inch outputs
• Guitar/bass amps and pedalboard returns that accept stereo quarter-inch connections

How durable and serviceable is the cable for frequent setup changes?

The cable is built for repeated handling and temporary stage or studio setups. Connectors are standard 1/4" stereo male and female, providing easy plug-and-play replacement if adapters or couplers are needed. Your Cable Store backs the product with a 1-year limited warranty for manufacturing defects.

• Robust jacket to resist kinking and abrasion during transport
• Standard 1/4" male and female plugs for universal compatibility and easy swaps
• 1 Year limited warranty from Your Cable Store for added reassurance

How should I install and route a 100-foot headphone extension for best results?

For clean audio, route the cable away from AC mains, dimmer packs, and power transformers to reduce hum. Coil excess cable loosely — avoid tight coils that can stress conductors — and use cable ties or wraps designed for audio cable to organize runs. When possible, test levels at the far end before a performance to ensure no unexpected attenuation.

• Keep parallel runs away from powered cables and lighting dimmers
• Use loose coils or figure-eight wraps to store without damaging the jacket
• Check connections and volume at both ends before live use

Who is this for: Musicians, DJs, audio engineers, and home studio owners who need to extend a 1/4" stereo connection without reconfiguring gear will find this cable useful. It’s especially practical for stage setups, rehearsal spaces, recording rooms, and any situation that requires full-strength stereo reach across a long distance. If you need a manageable, single-cable solution with standard 1/4" compatibility and a one-year limited warranty, this extension is a solid, budget-conscious choice.

Features:

• 100 Feet long, 24 AWG
• One 1/4 inch (6.3mm) stereo male connector
• One 1/4 inch (6.3mm) stereo female connector
• For instruments, DJ equipment and home audio devices that use a 1/4 inch connector
• 1 Year Limited Your Cable Store Warranty