Yookeer Magnetic Cable Tie Mounts 50-Pack 22mm Black — Neodymium No-Drill Hold

Yookeer magnetic zip tie mount bases are compact magnetic holders designed to pair with cable ties so you can fasten and organize wires quickly on metal surfaces.

These 22 mm black magnetic mounts come in a 50-piece set and combine a neodymium magnet, protective rubber sleeve and steel core to hold zip ties in place without drilling or adhesive. They’re made for temporary or semi-permanent cable routing where you want to avoid damaging panels — ideal for workshops, server racks, garage setups and event rigging. Keep in mind their magnetic strength is optimized for temperatures below 80°C (176°F) and they perform best on flat ferrous surfaces.

How strong are the magnets and what loads will they hold?

Each mount is rated to resist a vertical pull of roughly 11.5 pounds under ideal conditions, giving a solid anchor point for bundled cables when combined with a quality nylon zip tie. Strength varies with surface flatness and cleanliness.

• Approximate vertical pull: 11.5 lb per magnet
• Best on flat, clean steel or iron surfaces
• Rubber sleeve improves lateral grip and reduces sliding
• Not intended for permanent heavy-duty lifting or structural support

How do I use these magnetic cable tie bases in a setup?

Using them is straightforward: press the magnetic base onto a metal surface, thread a zip tie through the center, place your cables inside the tie loop, tighten and trim the excess. They can be repositioned quickly without tools if you need to change routing.

• Place mount on a clean, flat metal panel for best hold
• Insert standard nylon zip tie through the mount’s eyelet
• Tighten tie around cables and cut off excess tail
• Remove and reposition as needed — no adhesives or screws required

Where can I use these magnetic mounts around home, shop, or events?

These mounts suit many environments where temporary or adjustable cable management is helpful: workshops, server racks, vehicle interiors with metal panels, lighting trusses and trade show booths. Keep them away from sensitive electronics and pacemakers.

• Organize charging cords, Ethernet and power runs in offices
• Secure lighting and audio cables on metal trusses or racks
• Tidying wires under workbenches, in tool cabinets, or on machinery
• Use in automotive areas with exposed metal panels (avoid high heat zones)

What are the material limits and care tips?

The bases combine magnet, A3 steel, rubber and nylon elements for a balance of grip and durability but they are small components so treat them accordingly. Avoid sustained exposure to temperatures above 80°C/176°F and keep them away from young children.

• Materials: neodymium magnet, A3 steel core, rubber sleeve
• Temperature limit: below 80°C (176°F) to prevent demagnetization
• Hand-clean surfaces and magnets to maintain holding power
• Package contains mounts only; zip ties sold separately

Who is this for? These Yookeer magnetic zip tie mount bases are a practical choice for DIYers, electricians, AV technicians, event crews and anyone who needs a flexible, no-drill way to secure cables on metal surfaces. The 50-piece count provides enough anchors for medium-scale projects, maintenance tasks or seasonal setups where quick installation and easy repositioning matter.