Toptekits i30 92mm Low-Noise CPU Cooler for LGA115x

The Cooler Master i30 by Toptekits is a compact, low-noise 92mm CPU cooler built to fit small cases and Intel LGA 1150/1151/1155/1156 sockets.

If you need a space-saving cooler that keeps operating noise low while offering direct compatibility with older Intel LGA115x motherboards, the i30 is engineered for that role. It combines a pre-pasted contact surface, a 92mm silent fan and an aluminum heatsink in a short 55–60mm profile to clear cramped chassis and low-profile builds.

How does the i30 keep temperatures under control in a small case?

The i30 uses a dense aluminum heatsink mated to a pre-applied thermal compound and a 92mm fan to move air directly across fins and away from the CPU. Its blower and fin geometry are tuned for constrained airflow channels found in compact systems, so it delivers consistent heat transfer without needing a tall tower cooler.

• 95 x 95 x 55 mm heatsink footprint fits small motherboards and mini cases.
• 92 x 92 x 25 mm fan spins up to ~2600 RPM for effective airflow.
• Pre-pasted thermal compound saves installation time and improves contact.

Will this cooler be noisy during everyday use or under load?

The manufacturer ratings list noise around 28±3 dBA (specs vary by source), which places the i30 in the low-noise category for compact coolers. In most typical desktop tasks it will be quiet; under higher CPU load the fan speed increases to maintain thermal performance but still stays lower than many high-RPM low-profile alternatives.

• Rated noise approximately 28 dBA ±3 under normal operation.
• Fan speed up to roughly 2600 RPM to balance cooling and acoustics.
• 3-pin power connector for simple motherboard control of fan speed.

Which Intel sockets and system types are compatible with the i30?

The i30 supports Intel LGA 1150, 1151, 1155 and 1156 sockets, making it compatible with a wide range of older mainstream Intel CPUs. Its short 55–60mm height is specifically intended for small form factor desktops, HTPCs and compact office machines where clearance is limited.

• Compatible with Intel LGA1150, LGA1151, LGA1155 and LGA1156 sockets.
• Compact height (approx. 55–60 mm) for low-profile PC cases and HTPCs.
• Includes mounting bracket and backplate for secure installation.

What comes in the box and how difficult is installation?

The i30 ships as a complete CPU cooling solution with the cooler pre-pasted, a mounting bracket/backplate and user manual, so installation is straightforward for anyone familiar with desktop builds. The fan uses a standard 3-pin connector and the mounting hardware fits the supported Intel sockets without additional adapters.

• Package includes one CPU cooler, mounting bracket/backplate and manual.
• Pre-applied thermal paste removes the need for separate compound during install.
• Standard 3-pin connector and common bracket design streamline fitting.

Who is this for: The Toptekits-distributed Cooler Master i30 is aimed at builders who need a compact, quiet CPU cooler for older Intel LGA115x systems or small-form-factor PCs. Choose the i30 when case clearance is limited but you still want a reliable cooler with simple installation, pre-applied thermal compound and a balance of low noise and adequate airflow for everyday tasks and moderate loads.