THE CIMPLE CO RG11 Coaxial Cable 100 ft Dual-Shielded

THE CIMPLE CO RG11 100-foot coaxial cable is a heavy-duty, dual-shielded indoor/outdoor cable built to deliver stable TV, satellite, and internet signals with watertight F-type connections.

This 100 ft (30 m) RG11 cable is designed to carry high-frequency signals farther and cleaner than thinner coax types, using a solid 14 AWG center conductor plus layered aluminum braiding and shielding. UV-resistant connectors and a weather-sealed PVC jacket make it suitable for rooftop antenna runs, satellite extension, or long cable modem feeds where signal integrity matters. The cable has been swept to 3.0 GHz, supports analog and digital transmissions, and includes precision F-type compression connectors for reliable, low-loss connections.

How does this cable improve signal quality over long runs?

RG11 has a thicker center conductor and heavier shielding than RG6, which reduces attenuation on long runs and helps preserve signal strength at higher frequencies. The dual-shield construction minimizes electromagnetic interference and maintains consistent throughput for TV, satellite, and broadband uses.

• 14 AWG solid copper center conductor for lower loss over distance
• Layered aluminum braiding and foil shields to block interference
• Swept to 3.0 GHz to support high-frequency transmissions
• Maintains 75-ohm impedance for compatibility with standard equipment

Can I use this RG11 cable outdoors and in wet conditions?

Yes — the cable is engineered for outdoor exposure with UV-coated connectors and a weather-stable PVC outer jacket. The F-type compression connectors create a watertight seal so the connection resists corrosion and moisture intrusion at entry points.

• Weather-sealed F-type compression connectors prevent water entry
• UV-resistant connector coating and durable PVC jacket for sunlight exposure
• Suitable for rooftop antennas, satellite dish extensions, and exterior runs
• Rated for both indoor routing and outdoor burial above ground (not direct-burial rated without conduit)

What devices and systems will this cable work with?

This RG11 cable is compatible with common coaxial equipment that accepts 75-ohm F-type connections, including TVs, cable boxes, satellite receivers, and many broadband modems. Because it supports both analog and digital signals across a wide frequency range, it’s a versatile choice for upgrades or long-distance connections.

• TVs, set-top boxes, and cable modems with F-type inputs
• Satellite receivers and extension runs to dishes
• HD over-the-air (OTA) and free-to-air (FTA) antennas
• CATV and other coaxial distribution systems

How easy is the cable to install and terminate?

The cable ships with precision-machined F-type compression connectors already attached for a secure, low-loss connection—no separate crimp sleeves required. Its thicker diameter means it’s stiffer than RG6, so plan routing and use proper clamps and strain relief when fastening along walls or through conduits.

• Pre-attached compression connectors for watertight terminations
• Stiffer jacket requires gentle bending radius; use clips and conduit where needed
• Compatible with standard F-type couplers and wall plates
• Ideal for runs requiring minimal signal loss over long distances

Who is this for? Installers, homeowners, and small-business users who need a robust coax solution for long exterior runs or high-frequency signal delivery will appreciate this 100 ft RG11 cable. Choose THE CIMPLE CO RG11 when you require durable weatherproof connectors, low attenuation across extended distances, and a cable that supports modern digital and analog coax systems without frequent maintenance.