Tendak 2.4GHz Wireless Audio Transmitter Receiver 160ft

Tendak's 2.4Ghz Wireless Audio Transmitter Receiver wirelessly sends stereo audio up to about 160 ft with low latency and independent volume controls for transmitter and receiver.

This compact Tendak adapter pair (transmitter + receiver) converts analog RCA or 3.5mm output into a stable 2.4GHz wireless stream so you can link a TV, subwoofer, powered speaker, or soundbar without running long cables. Housed in a metal shell for durability, the units auto-pair after power-up, provide two-way volume knobs, and include external antennas for improved range and interference resistance.

How far will the Tendak wireless audio link reach in real rooms?

Range depends on obstacles and local radio traffic: in clear outdoor settings you can expect roughly 50 meters (about 160 ft), while typical indoor performance sits between 30–50 meters (100–160 ft). Thick walls, other Wi-Fi/2.4GHz devices, and large metal objects will reduce distance and may increase dropouts.

• Maximum outdoor line-of-sight: ~50m (160 ft)
• Typical indoor range: 30–50m (100–160 ft)
• Obstacles and nearby routers will reduce reach

Will this unit work with my TV, soundbar, or powered speakers?

Yes — the Tendak transmitter accepts RCA or 3.5mm analog inputs and the receiver outputs the same formats, making it compatible with TVs, active speakers, soundbars, subwoofers, and desktop stereos that use analog connections. It transmits audio only, so it won't carry video signals.

• Inputs: RCA L/R and 3.5mm on the transmitter
• Outputs: RCA L/R and 3.5mm on the receiver
• Works with TVs, DVD players, powered speakers, and soundbars (audio only)

What about sound quality and latency for movies or music?

The Tendak system uses 2.4GHz low-latency streaming optimized for clear, stereo 2.0 audio. It delivers a clean, stable signal with noise suppression and sufficient sync for most home audio uses; however, extremely latency-sensitive tasks (e.g., professional audio monitoring) may require wired connections.

• 2.4GHz low-latency transmission for synchronized audio
• Stereo 2.0 analog signal support via RCA and 3.5mm
• Built-in anti-interference design for consistent playback

How do I set it up and control the volume?

Setup is plug-and-play: power each unit via the included USB cable, connect the transmitter to the audio source, and attach the receiver to your speaker or soundbar. The devices automatically pair; both units feature physical knobs for volume adjustment so you can fine-tune levels at source and at the listening end.

• Power: USB power cable included for both units
• Auto-pairing after power-on; no drivers required
• Volume knobs on both transmitter and receiver for two-way control

Who is this for? The Tendak 2.4Ghz Wireless Audio Transmitter Receiver is ideal for anyone who wants to remove messy cables between audio source and active speakers, extend sound to a secondary room, or add a wireless link to a soundbar, subwoofer, or powered speaker without replacing existing equipment. It suits home theater hobbyists, classroom audio setups, and small-stage or event uses where a reliable, easy-to-install wireless analog audio bridge is needed.