QualGear Ultra Low Profile TV Wall Mount 37"–70"

The QualGear QG-TM-001 is an ultra low-profile aluminum TV wall mount that secures most 37"–70" flat-panel TVs as close as 0.6" from the wall while supporting VESA patterns from 100x100 to 800x800 and up to 110 lbs.

This mounting solution uses a picture-hanging method to deliver a slim, finished look and a quick install path for ultra-flat LED and LCD screens. Constructed from lightweight aluminum, the QG-TM-001 combines a minimal gap from the wall with a built-in support stand that lets you pull the TV away slightly for cable access. Before buying, check your TV’s VESA pattern and note the installation constraints described below.

How close to the wall will my TV sit once mounted?

The QG-TM-001 is designed to position compatible screens extremely close to the wall—typically about 0.6 inches—creating a low-profile aesthetic similar to a picture frame. That near-wall placement reduces the visible gap and keeps the installation discreet.

• Typical clearance: approximately 0.6" from wall
• Suitable for ultra-flat LED and LCD panels
• Aluminum construction keeps the mount lightweight yet sturdy

Will this mount fit my TV and what load does it support?

This bracket supports most TVs and monitors between 37" and 70" and is rated up to 110 lbs. It accommodates a wide range of VESA patterns from 100x100mm up to 800x800mm, but double-check the VESA spacing on your TV before ordering.

• Weight capacity: 110 lbs (50 kg)
• VESA compatibility: 100x100mm through 800x800mm
• Recommended screen sizes: 37"–70" (measure your actual dimensions)

Are there any important installation restrictions I should know?

Yes—this model is not recommended for mounting on wood studs if your TV’s VESA pattern is smaller than 400x400mm. Installing to drywall with toggle bolts is possible but carries increased risk and is done at the installer’s discretion.

• Not compatible with wood-stud installations for VESA < 400x400mm
• Drywall installation with toggle bolts is possible at owner’s risk
• Always confirm stud location, wall material, and TV VESA before mounting

How does the mount handle cable connections and setup?

The mount includes a built-in support stand that lets you tilt the TV slightly outward to access ports and route cables without fully unmounting the screen. This feature simplifies the hookup of HDMI, power, and other cables during installation and service.

• Integrated stand holds TV away from wall for cable access
• Faster hookup and tidy cable routing behind the screen
• Reduces the need to remove the TV for simple connections

Who is this for: The QualGear QG-TM-001 is aimed at homeowners, renters, and AV installers who want a near-flush appearance for mid-to-large flat-panel TVs and need an easy-to-install bracket with wide VESA compatibility. It is best suited for installations on solid masonry or secure stud walls when the TV’s VESA pattern and weight fall within the mount’s specifications. If your TV has a VESA smaller than 400x400 and you plan to use wood studs, select a mount specifically rated for that configuration or consult a professional installer.

Note: Verify your TV’s VESA pattern and the wall structure before purchase. QualGear advises caution for non-standard drywall or wood-stud installations and disclaims liability for installations that do not follow the mount’s recommended guidelines.