MOOKEERF RG8X Dual CB Antenna Coax Cable 35FT with PL-259

MOOKEERF 35FT Dual CB Antenna Coax Cable is a low-loss RG8X stranded-core coax with three PL-259 connectors designed to link two CB or amateur antennas to a single transceiver over long runs.

This coax kit bundles a 35-foot length of RG8X (mini-8) cable built with a stranded pure-copper center conductor, dual shielding and a waterproof FEP jacket to preserve signal quality in outdoor installations. The cable’s construction minimizes insertion loss and rejects EMI/RFI while offering improved flexibility and durable PL-259 terminations. It’s intended for CB radio, ham setups and dual-antenna configurations where maintaining signal integrity across a longer feed line is important.

How does this cable reduce signal loss compared with standard coax?

The MOOKEERF RG8X uses a pure copper stranded center conductor and double shielding (aluminum foil plus tinned copper braid) to lower resistance and block interference. Those materials and the cable geometry reduce attenuation at CB and VHF/UHF frequencies versus cheaper single-shield cables.

• Stranded pure-copper core for lower DC resistance and better high-frequency transfer
• Aluminum foil + >95% tinned-copper braid shielding to cut EMI/RFI
• Designed for low insertion loss across the 27 MHz CB band and nearby frequencies

Will the cable survive outdoor exposure and repeated handling?

The outer FEP jacket is waterproof and chemically resistant, so the cable tolerates outdoor mounting and exposure to sun and moisture better than PVC-jacketed alternatives. In addition, the longer heat-shrink transition at each PL-259 helps keep the connector mechanically secure under movement and vibration.

• FEP outer jacket resists UV, moisture and temperature extremes
• 2.2" heat-shrink transition reduces connector strain and pull-off risk
• Robust PL-259 soldered fittings for repeated connect/disconnect cycles

How does the 3-connector configuration work for dual antennas?

This package includes three PL-259 male connectors to enable a dual-antenna feed or to terminate both ends of a run and add a jumper. One cable can combine two antenna feeds to a single transceiver input when used with the proper antenna combiner/switch or to provide flexible routing in multi-antenna installations.

• Includes three PL-259 male connectors ready for radio and antenna hookups
• Allows routing two antenna feedlines toward one transceiver with suitable combiner or SWR tuning
• Use as a long run plus short jumper or for parallel antenna arrangements

What makes this RG8X cable easier to work with during installation?

The stranded core adds flexibility so the cable bends around tight corners and through conduit more smoothly than solid-center cables of similar diameter. The manageable 35-foot length covers most rooftop or tower-to-cabin runs without excess bulk while remaining easy to coil and store.

• Stranded conductor improves bend radius and handling during routing
• 35-foot length balances reach and manageability for many installations
• Pre-attached connectors speed setup; compatible with standard PL-259/SO-239 interfaces

Who is this for? Installers, mobile-radio enthusiasts and amateur radio operators who need a weatherproof, low-loss 35-foot feedline for CB or VHF/UHF applications will find this cable useful. It’s suited to anyone combining antennas, replacing aging coax with a more shielded option, or running an outdoor feed where UV, water resistance and connector durability matter. The kit approach with three PL-259s also helps technicians quickly adapt the cable to different mounting and combiner arrangements without hunting parts.