MOOKEERF RG8x 35ft Coaxial Cable PL259 Male-to-Male

MOOKEERF RG8x 35ft coaxial cable is a low-loss, 50-ohm PL259 male-to-male extension built for CB, HAM, VHF/UHF and antenna test equipment.

This 35-foot RG8x (Mini-8) cable provides a step up from RG58-level performance with a solid-copper center conductor, aluminum foil plus tinned-copper braid shielding, and a waterproof white PVC jacket for reliable outdoor and mobile use. The cable is designed to minimize signal loss across longer runs and higher frequencies while keeping connectors protected with an extended heat-shrink sleeve. It is a versatile choice for radios, analyzers, dummy loads and tuners where a stable, low-interference connection matters.

How does this cable reduce signal loss compared with standard RG58?

The RG8x construction uses a thicker center conductor and denser shielding than RG58, which lowers attenuation and preserves signal strength over distance. That makes it better suited for higher-frequency VHF/UHF applications and longer antenna runs where every decibel counts.

• Solid copper inner conductor for improved conductivity.
• Aluminum foil plus tinned-copper braid for over 95% shielding.
• 50-ohm impedance matched for CB, HAM, and test equipment.

Will the PL259 connectors stay secure during outdoor and mobile use?

Yes — MOOKEERF extends the heat-shrink sleeve to 2.2 inches at each PL259 junction to reinforce the cable-to-connector transition. The longer shrink tube helps prevent stress-related pull-off and keeps water and debris from compromising the connection.

• Upgraded 2.2" heat-shrink for stronger mechanical support.
• Tinned surfaces resist corrosion in outdoor environments.
• Waterproof PVC jacket protects against moisture and UV exposure.

Which devices and situations is this coaxial cable suitable for?

This 35ft RG8x cable suits a wide range of RF tasks: extending CB and VHF/UHF mobile antennas, patching between radio gear and SWR meters, hooking up dummy loads or connecting antenna analyzers. It balances flexibility with ruggedness for vehicle installs, fixed base stations, and field testing.

• CB and citizen-band antenna extensions and mobile installs.
• HAM radio rigs, VHF/UHF transceivers and repeaters.
• Antenna analyzers, SWR meters, dummy loads, and tuners.

How should I maintain and install the RG8x cable to get the best performance?

Route the cable with gentle curves to avoid sharp bends, secure it with non-abrasive clamps, and keep connectors clean and properly tightened. Avoid kinking and excessive compression of the jacket to maintain low-loss performance and shielding integrity.

• Use gentle, large-radius bends; avoid tight coils.
• Secure with cable ties that won’t cut the jacket; avoid metal clamps that abrade the sheath.
• Inspect PL259 terminations periodically for corrosion and retorque as needed.

Who this is for: radio hobbyists, mobile operators, marine and land VHF/UHF users, station builders, and field technicians who need a durable, low-loss 35-foot extension for CB, HAM and test equipment. If you require a stronger signal transfer than RG58, a robust outdoor jacket, and improved shielding for noisy environments, this MOOKEERF RG8x cable is a practical, cost-effective upgrade.