MOOKEERF RG6 Coaxial Cable 200ft 18AWG 75Ω Dual Shield

This 200-foot RG6 coax from MOOKEERF combines a solid 18 AWG pure copper conductor with a 100% foil plus 60% braided shield to keep interference low across long distances. The PVC jacket offers flexibility and weather resistance so the cable can be routed indoors or outdoors for home entertainment, professional installations, or security systems. Sweep-tested performance up to 6 GHz makes it suitable for many modern RF tasks without unnecessary bulk or fragile construction.

How does this cable maintain a clean signal over long runs?

The MOOKEERF RG6 uses a thick 18 AWG pure copper center conductor and a dual-layer shield—100% foil plus a 60% braid—that together reduce signal loss and reject EMI/RFI. This construction stabilizes impedance at 75 ohms, which helps preserve quality on extended runs and through multiple connectors or splitters.

• 18 AWG pure copper core for lower resistance and better conductivity
• 100% aluminum foil provides full coverage to block high-frequency interference
• 60% braided shield adds mechanical strength and extra noise rejection
• Sweep-tested to high frequencies for reliable broadband performance

Is this cable suitable for outdoor or exposed installations?

The cable’s outer jacket is flexible PVC that resists abrasion, moisture, and typical environmental wear. While PVC jackets are robust for standard outdoor routing and entry points, permanent burial requires a dedicated direct-burial or gel-filled cable designed specifically for underground use.

• Flexible PVC jacket for easy routing around corners and through conduits
• Weather-resistant exterior for temporary outdoor runs and roof routing
• Not intended as a substitute for direct-burial rated cable
• Pairs well with weatherproof connectors and entry grommets

Which devices and systems will this RG6 cable work with?

MOOKEERF RG6 is designed for a broad range of 75Ω RF applications, including satellite dishes, cable TV, over-the-air antennas, CCTV cameras, and cellular signal amplifiers. Its high-frequency capability and sturdy shielding also make it a good choice for multi-socket distribution and long-distance links in home and light-commercial installations.

• Satellite receivers and cable set-top boxes
• CCTV cameras and DVR/NVR connections
• Over-the-air antennas and signal boosters
• Broadcast and cellular test or temporary feed runs

What should I know about connectors, handling, and installation?

This cable accepts standard F-type and other 75Ω connectors; proper crimping or compression greatly improves signal reliability. Avoid excessive kinks, sharp bends, or heavy crushing forces near connectors to preserve impedance and shielding integrity.

• Use quality F-type compression or crimp connectors for best contact
• Maintain gentle bend radius to prevent conductor deformation
• Trim dielectric cleanly for consistent connector fit and shielding contact
• Label long runs and test signal levels after installation

Who is this for: Installers, AV hobbyists, and anyone needing a reliable 75Ω feed for long runs — MOOKEERF RG6 200FT is aimed at users who require durable shielding, pure copper conductivity, and flexible routing for satellite, cable TV, CCTV, and cellular or broadcast experiments. If you want a quality RG6 that balances performance, flexibility, and weather resistance for typical indoor and many outdoor routing needs, this cable is a practical choice.