MOOKEERF Dual CB Antenna Coax Cable 25FT RG8X

MOOKEERF Dual CB Antenna Coax Cable 25FT is a low-loss RG8X stranded-core coax that links two CB or ham antennas to a single transceiver with three durable PL-259 connectors.

This 25-foot dual CB coax is engineered for hobbyists and mobile operators who need reliable signal transfer across a flexible run. Built from a stranded pure-copper center conductor, multi-layer shielding and a waterproof FEP outer jacket, this cable balances low attenuation with handling ease. The kit includes three robust PL-259 male connectors and is intended for linking twin antennas or creating a co-phased setup where signal integrity matters over medium distances.

How does this cable reduce signal loss compared to basic coax?

The MOOKEERF cable uses a stranded pure copper inner conductor plus an aluminum foil layer and a tinned-copper braid to improve shield coverage. These materials together minimize leakage and external interference, keeping attenuation lower than many generic cables.

• Stranded pure-copper center for consistent conductivity and flexibility
• Double shielding (foil + braid) for >95% coverage
• Optimized for CB and amateur radio frequency ranges

Will this cable hold up outdoors and in vehicle installations?

The outer FEP jacket is designed to resist moisture, sunlight and temperature changes often encountered on vehicles or rooftop runs. The cable’s flexibility helps route it through tight grommets and around corners without compromising the internal conductors.

• Waterproof FEP jacket for outdoor exposure
• Flexible stranded core eases routing through cramped spaces
• Durable braid and heat-shrink on connectors reduce failure points

Are the PL-259 connectors reliable for repeated installs?

MOOKEERF supplies rugged PL-259 male connectors with extended heat-shrink collars to reinforce the cable-to-connector junction. Good soldering and the longer shrink tube reduce the chance of the connector pulling loose under vibration or handling.

• Three PL-259 male connectors included for multi-antenna hookups
• Upgraded 2.2" heat-shrink coverage where cable meets connector
• Solid mechanical bonding and soldered joints for longevity

How do I use this cable to feed two antennas from one radio?

The cable is arranged as a dual-feed coax with three PL-259s: one end typically connects to the transceiver while the other two feed each antenna. Use appropriate antenna phasing or splitters per your setup to ensure correct impedance and phasing for co-phasing or diversity applications.

• One transceiver connection and two antenna outputs via PL-259s
• Works with twin CB antennas or amateur radio dipoles when matched
• Verify SWR and phasing after installation for optimal performance

Who is this for: This MOOKEERF 25-foot dual RG8X coax is aimed at CB radio enthusiasts, amateur operators and mobile installers who need a balance of low loss, weather resistance and flexible routing. It fits users who plan to combine or co-phase two antennas to a single radio and want rugged PL-259 connectors for vehicle or outdoor mounting. If you require a longer run, heavier gauge, or a factory-assembled N- or SO-239 option, consider matching cable types and connector styles to your specific setup.