Monoprice RG6 Quad-Shield Coaxial Cable 100ft White — 75Ω, 18AWG CL2 F-Type

Monoprice 100ft RG6 quad-shield coaxial cable is a heavy-duty, 75Ω, 18AWG cable with F-type connectors designed to deliver reliable high-frequency signal transfer while minimizing interference.

This 100-foot Monoprice coaxial cable is built for TV, satellite, cable, and broadband uses where stable signal and low noise matter. Its RG-6/UL 18AWG construction and quad shielding support frequencies up to 2200 MHz, and the white CM (CL2) rated PVC jacket makes it suitable for in-wall and exposed installations that require a clean look. The included F-type connectors provide secure, standard connections for consumer AV and networking equipment.

What makes this cable better at reducing interference?

Quad shielding combines multiple layers to block both electromagnetic and radio-frequency interference. Monoprice uses 100% aluminum-mylar foil plus a 60% aluminum braid for robust coverage, which reduces signal leakage and keeps external noise from degrading your audio, video, or data streams.

• Four shielding layers: foil + braid construction for superior noise rejection
• 100% aluminum-mylar foil for continuous coverage
• 60% aluminum braid increases mechanical durability and shielding density
• Maintains consistent impedance for less reflection and loss

How well does it carry high-frequency signals like digital TV and internet?

Rated at 75 ohms and specified up to 2200 MHz, this RG6 cable is suitable for modern digital TV, satellite, and DOCSIS-based cable Internet connections. The 18 AWG center conductor and stable dielectric help preserve signal integrity over the full 100-foot run, making it a solid choice for most residential AV and broadband setups.

• 75Ω impedance matches standard consumer video and cable systems
• 2200 MHz rating supports high-bandwidth channels and digital services
• 18 AWG conductor minimizes attenuation over longer runs
• F-type connectors ensure reliable screw-on connections

Is this cable safe and code-friendly for in-wall installation?

Yes — the cable uses a CM (CL2) rated PVC jacket which meets many building-code requirements for in-wall rated cabling in residential and light commercial applications. The white jacket also blends into wall and baseboard environments, keeping the installation neat and visually unobtrusive.

• CM (CL2) rated PVC jacket for many in-wall installations
• White exterior for a clean finish behind TVs or along walls
• Durable jacket resists abrasion and everyday wear
• Suitable for both exposed runs and concealed routing where CL2 is accepted

How do I use this cable with my devices and what accessories might I need?

The cable terminates in standard F-type connectors that screw onto TVs, modems, splitters, wall plates, and satellite receivers. For neat installations you may want compression or crimp adapters, wall plates, or splitters depending on your setup. Always shut off devices when connecting or disconnecting and tighten connectors finger-tight plus a slight snug with a wrench.

• Includes F-type connectors for direct connection to consumer equipment
• Works with splitters, wall plates, and adapters designed for RG6
• Compression fittings and wall plates available for professional finishes
• Recommended: cable tester for long runs to verify continuity and signal levels

Who is this for? Installers, home theater enthusiasts, and homeowners who need a dependable, long-length coaxial run will appreciate the Monoprice 100ft RG6 quad-shield cable. It suits anyone upgrading from older or poorly shielded coax, running TV or internet lines across rooms, or wiring a new media center where stable high-frequency performance and in-wall rated jacketing matter.