JHK JIEHONGKE 15.6" 1366×768 WXGA eDP 30-pin LCD

This is a brand-new JHK JIEHONGKE 15.6" matte LCD replacement (1366×768 WXGA) with a 30-pin eDP connector designed for HP 15-FD0081WM and 15-FD0083WM laptops.

If your HP laptop display is cracked, dim, or shows dead pixels, swapping in the correct JHK JIEHONGKE panel restores native resolution and screen behavior. The panel is non-touch, slim-profile (PCBA flat) and uses the eDP 30-pin interface; it arrives with double-sided stretch-release adhesive tape to help secure the new screen during installation. A short 3-month warranty backs manufacturing defects, but the package contains only the LCD module — keep your original bezel, back cover, and controller board for reuse.

How do I confirm this screen fits my laptop?

Match three critical attributes on your existing panel: diagonal size, resolution/backlight type, and connector pin count. If any of those differ from 15.6", 1366×768 WXGA, or a 30-pin eDP, the replacement will not be compatible.

• Confirm diagonal screen size is 15.6 inches.
• Verify resolution reads 1366(RGB)×768 (WXGA) on your original label.
• Check the signal interface is eDP with a 30-pin connector and that the screen is non-touch.

What should I expect in the box and what isn’t included?

The shipment includes a single brand-new JHK JIEHONGKE LCD module and complimentary double-sided release adhesive tape to help mount the panel. No bezel, back cover, controller board, tools, or printed instructions are provided, so you must reuse parts from your laptop and follow safe installation procedures.

• Included: JHK JIEHONGKE 15.6" matte LCD, adhesive tape.
• Not included: bezel, back cover, controller board, battery, or tools.
• Keep original laptop parts and document cable routing before removal.

Are there installation precautions I should follow?

Always power down the laptop, disconnect the mains, and remove or isolate the internal battery before touching the display connector to avoid electrical damage. Handle the LCD by its edges, avoid pressure on the panel surface, and ensure cables and the eDP connector align before powering back on.

• Disconnect power and battery before starting work.
• Use the provided tape to secure the new panel gently and evenly.
• Avoid touching circuitry and keep small screws organized for reassembly.

What warranty and support come with the replacement screen?

JHK JIEHONGKE provides a 3-month warranty covering manufacturing defects; cosmetic damage during installation or mismatched specifications are not covered. If you are uncertain about model fit or need help identifying screen specs, contact the seller prior to ordering for guidance.

• 3-month limited warranty for manufacturing faults.
• Seller assistance available to confirm compatibility before purchase.
• Replacement refunds or exchanges depend on returned condition and diagnosis.

Who is this for: This replacement is intended for technicians and experienced DIYers who own HP 15-FD0081WM or 15-FD0083WM laptops and need an exact, direct-fit non-touch 15.6" WXGA panel. Choose this part if you need the same resolution, eDP 30-pin connector, and a matte finish; if you are unsure about matching your original screen specifications, get support before ordering to avoid incompatibility.