Jgstkcity recessed power strip countertop charging station (White) — 2 AC outlets, 65W dual USB‑C fast charge, 6 ft cord

The Jgstkcity Recessed Power Strip is a flush-mount countertop and furniture charging station with two AC outlets and a 65W dual USB‑C fast‑charge system plus two USB‑A ports.

This compact, recessed power unit installs into tabletops, drawers, or side tables to supply AC power and intelligent USB charging without cluttering surfaces. Built for desks, end tables, and custom cabinetry, it blends a low-profile white housing with several fast‑charge standards (PD 3.0, QC3.0, PPS), enabling up to 65W to a single USB‑C port when other USB ports are unused. The unit includes a 6‑foot cord and supports up to 1500W total on its two grounded AC sockets for everyday electronics.

How does the recessed design save space and look better than a standard strip?

The slim, drop‑in form factor sits flush with tabletops or inside drawers so plugs and cables stay out of sight. Because it integrates into furniture, your workspace appears cleaner and you avoid dangling cords across rooms. Installation requires a rectangular cutout and a few screws to secure the module in place.

• Flush mount fits into cutout 4.3" x 1.78"
• Low-profile white bezel for minimal visual impact
• Installs in side tables, cabinetry, or drawers to hide cables

Which devices can I charge and how fast will they charge?

The unit supports two USB‑C ports and two USB‑A ports plus two AC outlets, making it suitable for laptops, phones, tablets, watches and small accessories. When a single USB‑C port is used alone it can deliver up to 65W (PD/PPS), enough to refill many laptops and deliver quick phone charging. If multiple USB ports are used at once, power is shared and peak 65W output will not be available.

• USB‑C output: up to 65W single‑port (PD 3.0, PPS supported)
• USB‑A outputs: up to 36W combined across ports
• AC sockets: two grounded outlets, 125VAC, 12A (max 1500W)

Is it safe and compatible with my furniture and devices?

The power strip uses standard AC sockets and modern USB charging protocols to communicate with devices and adjust voltage and current safely. Built‑in protections and recognized fast‑charging standards reduce the risk of improper charging, and the unit is intended for indoor, dry locations within furniture pieces. Always follow the included cutout dimensions and mounting instructions to ensure a secure installation.

• Supports USB PD 3.0, QC3.0 and PPS charging modes
• Designed for indoor furniture mounting only
• Follow the 4.3" x 1.78" cutout and secure with supplied screws

How simple is the setup and what hardware is required?

Installation is straightforward for anyone comfortable with basic woodworking and electrical safety: measure, cut the rectangular slot, set the unit in place and tighten the mounting screws. The included 6‑foot cord plugs into a standard wall outlet; no hardwiring is necessary. If installing into drawer fronts or custom cabinetry, check clearances beneath the surface before cutting.

• Hole cut size: L 4.3" x W 1.78" for recessed fit
• 6 ft power cable for flexible placement from wall outlets
• No permanent wiring—plugs into existing wall outlet

Who is this for: The Jgstkcity recessed charging station is aimed at homeowners, office managers, and furniture makers who want a tidy, integrated power solution for living rooms, workstations, and hospitality spaces. Choose this unit if you need a compact, multi‑port charger that hides cords, supports modern fast‑charge protocols, and powers everyday electronics from a discreet furniture installation.