HEZI 20A Metal Power Strip Surge Protector 8-Outlet 10ft

HEZI 20Amp metal power strip with 8 grounded outlets and a 10 ft 12AWG heavy-duty cord provides surge protection (1200J) and a 20A circuit breaker for reliable workshop and garage power.

This compact, mountable metal surge protector is built to feed multiple tools, chargers, and appliances from a single 20A feed while offering protection against spikes, overloads, and overheating. The unit’s 10-foot, 12-gauge cord and robust 20A/125V rating make it suitable for heavy-duty environments where a standard consumer strip would be undersized. CSA, ETL, and UL certifications back its electrical safety features, and a resettable circuit breaker adds a layer of damage prevention if an overcurrent occurs.

How does the HEZI strip protect my tools and devices?

The strip combines a 1200-joule surge suppression module with a 20A circuit breaker to guard connected equipment against voltage spikes and prolonged overloads. It diverts transient spikes and will trip if sustained current exceeds the 20A threshold, preventing potential damage to plugged-in devices.

• 1200J surge absorber reduces energy from electrical spikes.
• Resettable 20A circuit breaker cuts power on overload and is easy to reset.
• UL/ETL/CSA certifications confirm tested safety standards.

Can I use this power strip on a 15A household circuit?

Yes—physically the HEZI strip will plug into a 15A or 20A receptacle, but you must respect the lower circuit limit. When attached to a 15A supply, do not exceed 1875 watts to avoid tripping the breaker or risking overload.

• Rated output: 20A/125V/2500W maximum.
• On 15A circuits, limit combined load to 1875W or less.
• 10 ft 12AWG cord minimizes voltage drop for long-reach setups.

Where can I mount and use this heavy-duty power strip?

The HEZI strip’s sturdy metal housing and two built-in mounting holes enable fast installation on walls, workbenches, or under tables. Its metal case resists impacts and sparks, making it appropriate for garages, workshops, job sites, and utility rooms where durability matters.

• Two metal mounting holes for vertical or horizontal placement.
• Metal enclosure resists wear from workshop environments.
• Compact footprint keeps a workspace organized while supplying eight outlets.

What kinds of equipment is this designed to support?

This power strip is made for heavier loads than typical consumer strips: think bench grinders, air compressors (control circuits), power tools, battery chargers, and multiple small appliances used in workshops. Avoid plugging in single appliances that individually require a dedicated high-current feed beyond the circuit rating.

• Suitable for power tools, chargers, and shop electronics.
• Not a substitute for dedicated hardwired equipment that needs its own circuit.
• Use the 10 ft 12AWG cord to position the strip where outlets are limited.

Who is this for: HEZI’s 20A metal power strip is aimed at homeowners, hobbyists, technicians, and small shops that need a durable, mountable multi-outlet solution with surge protection and overload safety. Choose this model if you want a heavy-gauge cord, a metal enclosure for rough environments, eight grounded outlets, and an extra layer of protection for tools and workspace electronics.