FLYPROFiber OM3 LC‑LC 1m Fiber Patch Cable 10-Pack

FLYPROFiber OM3 LC-to-LC 1m duplex patch cable (10-pack) is a high-performance multimode fiber assembly built for 10G/40G network links, data centers, and high-density installations.

These 1 meter LC–LC OM3 patch cords come as a factory-tested 10-piece pack with LSZH jackets, UPC-polished zirconia ferrules, and duplex clips labeled for easy Tx/Rx identification. Built from 50/125µm multimode fiber, the cables support short-range 10G and 40G Ethernet connections, offer tight bending tolerance for rack-dense environments, and include clear marking to speed installation and troubleshooting.

How fast and how far can these OM3 cables carry signals?

OM3 multimode fiber is optimized for laser-based short-range transmission. These 50/125µm cords are specified to handle 10Gb Ethernet well within typical data center spans and support higher aggregate links for breakout and trunking.

• 1 Gb/s: up to 550 meters at 850 nm.
• 10 Gb/s: up to 300 meters at 850 nm.
• 40 Gb/s: up to 300 meters (using parallel optics) at 850 nm.
• 100 Gb/s: up to 200 meters at 850 nm (with appropriate QSFP+/modules).
• Modal bandwidth: 2000 MHz·km @ 850 nm.

What makes these cables suitable for high-density racks and tight bends?

FLYPROFiber designed the cable with a small bend radius and rugged multimode construction to survive cramped cable management channels without large signal loss. That makes them well suited to SAN cabinets, patch panels, and conduit where numerous turns are required.

• Minimum bend radius: 7.5 mm for easy routing in tight spaces.
• 50/125µm core/cladding multimode fiber reduces microbend sensitivity.
• Low insertion loss (≤0.3 dB) and high return loss (≥30 dB) preserve link integrity.
• Compact LC duplex connectors reduce panel space compared with larger connectors.

How do the connectors and jacket features simplify installation and maintenance?

The patch cords use UPC-polished LC connectors with Japan-made zirconia ceramic ferrules for repeatable low-loss mating. Duplex clips, embossed A/B markers, and numbered jacket tags speed polarity checks and reduce cross-connections during upgrades.

• LC-to-LC duplex connectors with UPC polish for consistent mating loss.
• Zirconia ceramic ferrules (Japan-made) for accurate fiber alignment.
• Embossed A/B duplex clip and labeled jacket rings (1 & 2) for Tx/Rx identification.
• LSZH jacket for reduced smoke and halogen emissions in confined spaces.

What length and packaging options are available, and how are they quality-checked?

These patch cords are offered in a wide range of lengths so you can match cable runs precisely and limit excess slack. Each cable is factory tested for insertion loss and endface quality to meet performance requirements for enterprise and carrier environments.

• Length options from 0.2 m up to 200 m to suit short patch and longer intra-facility runs.
• This listing: 1 m (3 ft) cables sold as a 10-pack for consistent bulk deployment.
• Factory testing of insertion loss, return loss, and connector endface inspection.
• FLYPROFiber provides customer support and warranty assistance for product issues.

Who is this for? Network engineers, data center technicians, and IT teams who need reliable short-range multimode fiber for 10G/40G links will find these FLYPROFiber OM3 LC–LC 1m duplex cables well matched to high-density racks, SANs, and switch-to-transceiver patching. The 10-pack format is convenient for rollouts and spares, while the LSZH jacket and labeled duplex clips reduce installation time and safety concerns in populated facilities.