Electriduct 3/4" Non-Slit Polyethylene Wire Loom 10 ft

Electriduct 3/4" non-slit polyethylene wire loom is a 10-foot flexible, corrugated innerduct that fully encases and protects cables, hoses, and wire bundles in demanding environments.

This non-slit corrugated conduit from Electriduct combines a rugged, continuous wall with a flexible corrugated profile to protect and route wiring where abrasion, heat, oils, or sunlight are concerns. Made from UV-rated polyethylene, the tubing resists chemicals, fluids and mechanical wear while bending easily around engine bays, panels, and tight runs without collapsing. The 3/4" inside diameter accommodates common automotive and electronics bundles and the 10-foot length is convenient for multi-step installations or cutting to custom lengths.

How does this non-slit loom protect cables better than split tubing?

A continuous, non-slit design eliminates open seams so dirt, moisture and abrasion cannot reach the cable bundle. The closed-wall construction also prevents chafing from edges and offers a more uniform crush resistance than slit alternatives.

• Complete barrier: wraps cables fully rather than relying on a seam.
• Improved abrasion resistance: corrugated exterior disperses wear.
• Better environmental protection: blocks moisture, oils, and debris.
• Cleaner aesthetic: hides and organizes wiring for professional installs.

Will it withstand hot engine bays, sunlight, and harsh chemicals?

Yes — Electriduct’s polyethylene formula is UV rated and engineered to tolerate a wide temperature span, making it suitable for outdoor and under-hood use. Its material resists many fuels, oils and common shop fluids, extending the service life of the protected wiring.

• Operating range: -40°F to +200°F (-40°C to +93°C).
• UV-stable: resists sunlight degradation for outdoor exposure.
• Chemical resistance: withstands oils, fluids and many cleaners.
• Durable finish: resists abrasion from vibration and movement.

How easy is it to route and install this flexible innerduct?

The corrugated profile gives the conduit high flexibility so it navigates around corners, through engine compartments and past obstructions without kinking or crushing the interior. Installers can cut the 10-foot length with standard tools and secure it using clamps, zip ties, or mounting clips for a tidy, reliable run.

• Flexible corrugation: bends smoothly around tight radii.
• Cut-to-length: trim with scissors or a utility knife for custom runs.
• Compatibility: pairs with clamps, ties, and grommets for mounting.
• Non-crush performance: preserves cable geometry under load.

What applications is this conduit best suited for?

This non-slit Electriduct conduit is intended for any installation that benefits from full cable enclosure and toughness. Typical uses include automotive wiring harnesses, marine cable runs, telecom and data routes, construction equipment, and home-theater or electronics projects.

• Automotive and marine: under-hood and bilge areas where fluids and heat occur.
• Industrial and construction: protect control cables and sensor leads.
• Telecom and electronics: organize and shield data and power bundles.
• Home installations: tidy AV and theater wiring behind equipment.

Who is this for? Installers, technicians and DIYers who need a professional-grade, closed-wall conduit that combines flexibility with robust protection will appreciate Electriduct’s 3/4" non-slit wire loom. It’s designed for people specifying durable cable protection in automotive, marine, telecom, industrial and home-electronics projects who want a UV-rated, chemical-resistant tubing that’s easy to route and cut to length.