D-Line Cord Cover Kit 157in Paintable Self-Adhesive Raceway

Cleanly hide and manage up to three small cables along walls with the D-Line 157in Cord Cover Kit — a paintable, self-adhesive raceway system supplied with 10 channel lengths and 19 fittings.

This cord cover kit organizes and conceals wires for TVs, soundbars, home office setups and general household electronics without chasing channels into drywall. Each slim channel is 1.18" wide and 0.59" high, fits multiple thin cords, and arrives with pre-applied adhesive so you can install it quickly. The white finish is ready to be painted to match trim or wall color after light sanding and priming.

How simple is installation for a renter or DIYer?

Installation is designed to be fast and low-impact: peel the backing from the adhesive, press the channel to the wall, and snap on the cover. The kit includes a variety of connectors and corners so you can run cable around door frames and junctions without extra tools. Since it sticks on rather than requiring screws, it’s suitable for renters or anyone who prefers non-permanent solutions.

• Pre-applied adhesive tape on every 15.7" length for peel-and-stick mounting
• Snap-fit covers for tool-free access to cables
• 19 accessories (corners, joints, end caps) to route cables neatly
• No drywall cutting or drilling required for typical indoor use

What cable capacity and dimensions should I expect?

Each channel measures 1.18" wide by 0.59" high and can hold several slim cords such as power leads, HDMI, Ethernet, or speaker wire. The specification notes it can accommodate about three cables of roughly 0.18" (4.5 mm) outer diameter each, which covers most common AV and data cables. For thicker power bricks or oversized bundles, you may need a larger raceway or to spread cables across multiple channels.

• Channel interior fits multiple small-diameter cables (approx. three 4.5mm cords)
• Each kit contains ten 15.7" lengths totaling 157 inches of coverage
• Slim profile (1.18" W × 0.59" H) blends with baseboards and trim
• White finish ready for color-matching paint

Can I paint these covers to match my walls and how?

Yes — the PVC material accepts paint after light preparation. Lightly sand the outer surface, wipe away dust, apply a primer suitable for plastics if desired, then apply two thin coats of your chosen paint for a uniform finish. Use flexible acrylic or water-based paint recommended for trim for best adhesion and a smooth look.

• Sand the surface lightly before painting for better adhesion
• Apply primer for plastics if using oil-based paints
• Two thin coats produce a clean, consistent color match
• Paintable material helps conceal the raceway against walls or trim

Which accessories are included and why do they matter?

The kit comes with 19 accessories to navigate typical room layouts without visible gaps or messy splices. You get corners, internal and external joins, and end caps that create a finished look and maintain cable protection at turns. These extras reduce the need for cutting channels on-site and let you create continuous runs around obstacles.

• 19 fitting pieces for corners, joins, and tidy terminations
• Accessories help maintain a secure, finished appearance at angles
• Joiners let you extend runs without visible seams or exposed cables
• End caps keep dust out and give a professional look at terminations

Who is this for: homeowners, renters, and small businesses seeking a neat, non-destructive way to tidy visible cables along walls. It’s useful for TV installations, wall-mounted soundbars, desktop cable routing, and temporary or permanent setups where a low-profile, paintable solution is preferred. If you need to hide a few slim cords without major renovation, this D-Line kit offers a complete, adaptable system.