Cheetah Tilt TV Mount 32-86" 165lb VESA 600x400

The Cheetah Tilt TV Mount is a heavy-duty, ultra-low-profile wall bracket that secures 32–86" TVs up to 165 lbs, offers 15° tilt for glare control, and includes a 10 ft braided 4K HDMI cable.

Built from thick cold-rolled steel and hardened lag bolts, this universal flat wall mount is designed for modern home and commercial displays. It supports VESA patterns up to 600 x 400 mm, fits standard 16"–24" stud layouts, and arrives with a full hardware kit to simplify installation. The package also contains a premium Twisted Veins 10 ft braided HDMI 2.0b cable and cable ties so you can connect 4K HDR sources right away.

How does the mount keep large TVs secure on the wall?

The Cheetah mount uses a full-length slotted wall plate, 8 mm hardened lag bolts, and thick cold-rolled steel to distribute the load across studs. A locking pin and lift-and-lock bracket design prevent accidental lift-off while pull strings let you release the TV quickly when needed.

• Rated for up to 165 lbs and VESA 600 x 400 mm (24 x 16").
• 8 mm hardened steel lag bolts for strong stud anchoring.
• Lift-and-lock mechanism with locking pin for secure attachment.
• Slotted wall plate fits 16" and 24" stud spacing and irregular patterns.

Will it keep the TV close to the wall and reduce glare?

This bracket achieves an ultra-low 1.3" profile for a near-flush look, and it offers up to 15° of tilt to help reduce reflections without moving the whole set. The tilt adjustment is simple to set during installation or later fine-tuning.

• 1.3" low-profile depth for a sleek, wall-hugging installation.
• Adjustable tilt up to 15° for better viewing angles and glare control.
• Gray accent pieces and round rods for a cleaner visible finish.

What hardware and accessories come with the mount to make installation easier?

The mount ships with a comprehensive hardware pack and helpful tools to reduce guesswork during setup. Everything needed for most TV models is included, plus extras for masonry walls and a magnetic level to speed a squared install.

• Full hardware kit: screws, spacers, 8 mm lag bolts, masonry anchors.
• 6" 3-axis magnetic level included for accurate alignment.
• Microfiber cleaning cloth and three matching microfiber cable ties.
• Pre-installed pull strings and lift-and-lock brackets for easier mounting.

Does it work with my TV size and stud spacing?

Designed for wide compatibility, the Cheetah mount supports most televisions from 32" to 86" and VESA patterns up to 600 x 400 mm. The slotted wall plate accommodates 16" and 24" studs and can be positioned to match nonstandard or offset stud layouts.

• Supports TVs up to 86" and some newer models up to 100" if under 165 lbs.
• Max VESA 600 x 400 mm (24 x 16") for broad brand compatibility.
• Slotted mounting plate fits 16" and 24" stud spacing and unusual patterns.

Who is this for: The Cheetah Tilt TV Mount is aimed at homeowners, renters (with proper anchors), AV installers, and small-business spaces that need a sturdy, low-profile solution for large flat-panel TVs. It’s a good choice if you want a decorative yet robust bracket that ships with installation tools and a 10 ft braided HDMI cable so your display is wall-mounted and connected immediately.