CCCEI 20A Heavy-Duty Power Strip 8-Outlet 12AWG 4ft

CCCEI's heavy-duty 20 amp power strip is a durable, wall-mountable 8-outlet extension with a 12-gauge 4 ft cord and built-in surge and overload protection for shop and industrial use.

This power strip is engineered for high-draw tools and densely populated workspaces where a standard strip isn't enough. Bright yellow housing increases visibility in busy environments while the rugged 12 AWG cable carries higher currents with less heat. It combines a resettable breaker and surge suppression to protect equipment from common electrical hazards without sacrificing convenience.

How is this power strip different from a consumer-grade extension cord?

Unlike light-duty strips, this model uses thicker 12-gauge wiring and a 20A-rated switch and breaker, so it tolerates heavier continuous loads and reduces voltage drop. The metal-reinforced outlets and grounding are built for repeated tool connections in demanding settings.

• 12 AWG, 4-foot power cord for reduced heating under load
• 20 amp switch and resettable circuit breaker for high-current circuits
• Eight grounded outlets spaced for plugs and adapters
• Visible yellow housing for safety in workshops and garages

What protection does it offer for my tools and electronics?

This strip integrates surge suppression and overload protection to help guard against spikes and sustained overcurrent conditions. While not a substitute for whole-facility electrical protection, it offers targeted defense at the point of use.

• Surge absorber rated for larger transient events
• Resettable 20A circuit breaker prevents sustained overload
• Three-prong grounded outlets to reduce shock risk
• On/off switch to quickly cut power to all outlets

How do I mount and position it in a shop or garage?

The housing is designed for wall or bench mounting to keep cords off the floor and organized. Simple mounting slots on the rear align with common screws or anchors; position the strip within reach of your tool outlets while keeping the cord away from foot traffic and heat sources.

• Rear keyhole slots for secure wall attachment
• 4 ft cord keeps the strip close to a dedicated outlet or panel
• Bright color aids visible placement to avoid trip hazards
• Mount near a workbench to reduce cable clutter and improve access

Can I use this outside or on a construction site?

The unit is built for industrial and workshop environments but is not rated for continuous exposure to weather. Protect it from rain, direct water spray, and extreme outdoor conditions; use a weatherproof enclosure or approved outdoor-rated alternative when required.

• Designed for indoor industrial, shop, and garage use
• Keep dry and sheltered to maintain surge and grounding effectiveness
• Not intended for permanent outdoor installation without additional protection
• Suitable for temporary jobsite use if kept covered and off wet surfaces

Who is this product for? This CCCEI heavy-duty power strip is aimed at tradespeople, hobbyists, and facility managers who need a reliable, high-amp outlet solution for tools, compressors, chargers, and bench equipment. Choose this model when you require more robust wiring and protection than consumer strips provide, want easy wall-mount installation, and need visible, dependable power distribution in a workshop, garage, or light industrial setting.