CCCEI 20A Heavy Duty Power Strip 12‑Gauge, 8‑Outlet

CCCEI Heavy Duty Power Strip is a 20‑amp, 8‑outlet, 12‑gauge, 4‑foot surge‑protected extension designed for workshops, garages, and industrial spaces.

Built to deliver high amp capacity and reliable overload protection, this grey CCCEI wall‑mount power strip combines a heavy gauge cord, surge suppression, and a resettable 20A circuit breaker so multiple tools and devices can run safely from a single, convenient location. It’s especially useful where standard consumer strips aren’t robust enough: think compressors, benchtop tools, air movers, or clusters of shop chargers.

How does this power strip handle high current tools?

The strip uses a 12‑gauge, 4‑foot cord rated for high current and a 20A switch and circuit breaker to reduce overheating and nuisance trips when several heavy loads run together. The internal wiring and grounding are sized for sustained power delivery rather than intermittent light‑duty use.

• 12 AWG cord minimizes voltage drop and heat under load
• 20A resettable breaker protects against sustained overloads
• 3‑prong NEMA 5‑15P plug with grounding for safety
• Four‑foot length balances reach with reduced resistance

What surge and safety protections are included?

This unit incorporates surge suppression rated to absorb larger transients, plus overload and grounding protection that isolates faults before they reach connected equipment. A dedicated on/off switch and a resettable breaker give quick manual control and easy recovery after a trip.

• 4800J surge energy rating for transient absorption
• Resettable 20A circuit breaker for overload events
• Grounding and three‑pin plug to reduce shock risk
• Power switch for fast shutdown of all connected devices

How does the wall‑mount design help in a workspace?

The metal or reinforced housing and mounting keyholes keep the strip off floors, clear of debris, and easy to access at bench height. Mounting reduces cable clutter, prevents accidental unplugging, and positions outlets where tools and chargers are routinely used.

• Keyhole slots for secure wall or bench mounting
• Elevates outlets away from dust and spills on the floor
• Organizes multiple cords for a safer workspace
• Durable construction suitable for shop environments

How many devices can I run and what kind are appropriate?

With eight grounded outlets and high amp capacity, the strip accommodates a mix of medium‑to‑high draw tools and multiple chargers, provided the combined current stays within 20 amps. It’s not intended to replace dedicated hardwired circuits for permanently installed, continuous high‑power equipment.

• Good for benchtop tools, battery chargers, work lights, and vacuums
• Not a substitute for a hardwired motor circuit or fixed HVAC
• Use monitoring or separate circuits for simultaneous heavy draws
• Ideal for clustered power needs in workshops and garages

Who is this for: The CCCEI Heavy Duty Power Strip is for tradespeople, makers, and homeowners who need a rugged, mountable multi‑outlet solution with surge protection and a high‑amp cord. If you run multiple power tools, chargers, or high‑load devices in a workshop, garage, or commercial space and want an accessible, safer outlet bank that tolerates heavier currents than standard strips, this unit fits that need.