Cables Direct Online 16/2 Speaker Wire 250FT White CL2-Rated CCA Easy-Pull Box, 65-Strand Flexible

This 250-foot, 16/2 CL2-rated speaker cable from Cables Direct Online is a flexible, easy-pull Copper Clad Aluminum (CCA) wire designed for in-wall home audio and low-voltage installations.

If you need a long run of speaker or low-voltage cable for a room, whole-house audio, LED strips, or security sensors, this reel gives you a contractor-friendly solution. The 16 AWG two-conductor construction uses 65-strand 0.16mm CCA conductors inside a white, UL/NEC CL2-rated jacket that resists handling abuse while remaining pliable for bends and routing. The spool ships in an easy-pull box with sequential markings to simplify measuring and reduce waste during installation.

What materials make up this 16/2 speaker wire and why does it matter?

The conductors are Copper Clad Aluminum (CCA) made from many fine strands to balance flexibility and cost. The outer jacket is CL2-rated for in-wall low-voltage use, and includes an internal rip cord to speed jacket removal.

• 65-strand 0.16mm CCA conductors for decent signal transfer and flexibility
• 16 AWG (two conductors) suitable for many speaker and low-voltage runs
• White, flexible CL2-rated jacket for safe indoor routing
• Rip cord built into jacket for quick, clean stripping

How does the Easy Pull Box simplify installation?

The cable arrives on a 250-foot spool inside a cardboard easy-pull box that reduces tangles and helps you feed cable through walls or ceilings. Metered markings printed every two feet let you track remaining footage without unraveling the whole reel.

• Box lets you pull cable smoothly from the outlet without kinking
• Sequential footage markings every two feet for precise measurement
• Lightweight spool reduces arm strain during long runs

Will this wire work for speakers and other low-voltage devices?

Yes — this 16/2 cable is intended for speaker-level audio and a wide range of low-voltage systems like LED lighting, alarm sensors, and control panels. Match run length and power requirements to ensure minimal voltage drop for best performance.

• Good for near- and mid-range speaker runs in typical rooms
• Compatible with LED strips, motion detectors, and security devices
• Not intended for mains or high-voltage circuits — for low-voltage only

How do I prepare and terminate the CCA 16 AWG cable?

Use the jacket rip cord to remove the outer sheath, then trim and dress the stranded conductors for secure terminations. Use compatible speaker connectors or properly sized screw terminals to avoid loose connections and ensure stable contact.

• Pull rip cord, peel jacket, and twist strands before termination
• Use banana plugs, spade lugs, or plated terminals sized for 16 AWG
• Label runs and observe polarity for consistent speaker phasing

Who is this for? Installers, DIY home theater builders, and integrators who need a dependable, budget-conscious 250-foot run of in-wall-rated speaker and low-voltage cable will appreciate this product. Cables Direct Online provides the length, flexible jacket, and easy-pull packaging favored by electricians and hobbyists alike when running audio, lighting, or sensor wiring through walls, ceilings, and enclosures.