Cablelera IEC320 C14 to C19 Power Extension 6ft 14AWG

Cablelera's 6-foot IEC320 C14 to C19 power cord extension delivers reliable, high-current power to servers, PDUs, and UPS units with a heavy-duty 14AWG conductor and a 15A/250V rating.

When rack equipment and power distribution units sit too far from an available outlet or when you need a robust connection for high-draw devices, a purpose-built IEC extension keeps your data center and AV installations tidy and safe. This Cablelera cable bridges IEC320 C14 sources to IEC320 C19 inlets, giving you extra reach without compromising electrical capacity. Its 6-foot length and black jacket blend into rack environments while the thicker gauge supports sustained loads that thinner jumpers cannot reliably handle.

How does this extension maintain safe power delivery for servers and PDUs?

The cord uses 14AWG conductors, sized to carry up to 15 amps at 250 volts, which reduces voltage drop and heat buildup compared with thinner cables. Molded IEC connectors fit standard C14 and C19 sockets to ensure secure mating and minimize accidental disconnection in racks or enclosures.

• 14AWG copper conductors for lower resistance and better heat tolerance
• 15A/250V rating matching typical server and PDU requirements
• Molded IEC320 C14 plug and IEC320 C19 connector for snug connections
• 6-foot length to span racks, raised floors, or UPS placements

Will this cable fit my existing equipment and power layout?

This extension is designed for IEC-standard power inlets: the C14 end plugs into a C14 outlet or PDU, while the C19 end accepts devices with C20 inlets. It's compatible with most UPSs, PDUs, and enterprise servers that use the larger C19/C20 interface for higher current needs.

• C14-to-C19 termination matches common PDU-to-device scenarios
• Works with UPS and rack-mount servers using C20 inlets
• Black jacket provides unobtrusive integration in equipment racks
• Industry-standard connector dimensions for wide compatibility

What installation and handling tips should I follow?

Route the cable with gentle curves to avoid kinking and avoid sharp bends near the connectors. Keep the cord clear of high-traffic areas or moving parts in server rooms, and use proper cable management to reduce strain on connector ends.

• Avoid tight bends; maintain manufacturer-recommended bend radius
• Secure with Velcro straps or cable trays—not zip ties directly on the jacket
• Check connector seating and avoid over-torquing adjacent hardware
• Periodically inspect the jacket and connectors for wear or damage

How does the Cablelera extension compare to cheaper alternatives?

Higher-quality cable with 14AWG wire reduces electrical loss and runs cooler than thinner leads, which is important for continuous loads. Cablelera’s molded connectors and robust jacket are built for rack and data-center environments where reliability and physical durability matter more than the lowest cost.

• Thicker gauge for improved continuous-load performance
• Molded ends for mechanical durability and secure connections
• Designed for professional IT and AV installations, not temporary setups
• 6-foot length balances reach and cable-management simplicity

Who is this for: IT professionals, AV integrators, and anyone managing rack-mounted systems, PDUs, or UPS equipment who need a short, dependable IEC extension with greater current capacity than thin jumper cords. Choose this Cablelera 6' C14-to-C19 extension when you require a clean installation, reduced voltage drop, and connectors built for frequent use in server rooms and data centers.