Cablelera IEC C15 Power Cord NEMA 5-15P 10ft 14AWG

Cablelera's 10-foot power cord connects a NEMA 5-15P wall plug to an IEC 320 C15 inlet, built for devices that require a C15-only connection.

This cable is purpose-built for equipment with an IEC C15 inlet — a higher-heat-rated connector that is not interchangeable with the common C13 or the larger C19. With 14AWG conductors and a 15A/125V rating, the cord supplies reliable mains power when used with compatible appliances, servers, or network gear. Before purchasing, confirm your device’s inlet type; this cord will not fit C13 or C19 ports.

Which devices need an IEC C15 cord instead of the more common C13?

Some appliances and IT hardware that run hotter or are designed with elevated-temperature inlets use the C15 connector. Look for a recessed or keyed inlet labeled C15 on the device or in the product manual to verify fit.

• Heat-generating devices such as steam tables, small sanitary appliances, or specialized lab instruments
• Network and server components specified by the manufacturer to use C15 inlets
• Equipment datasheets or rear-panel markings that explicitly list IEC 320 C15

How safe and capable is this 14AWG, 15A/125V cord for continuous use?

The Cablelera cord is manufactured with 14-gauge conductors and rated at 15 amps and 125 volts, which is adequate for many small-to-medium electrical loads within those limits. Use it only with devices whose current draw and inlet type match the cord’s ratings, and avoid overloading circuits.

• 14AWG conductors provide low voltage drop for typical device loads
• 15A/125V rating aligns with North American standard mains circuits
• Not an adapter — does not change inlet type or electrical characteristics

What compatibility checks should I do before buying this C15 cable?

Confirm the inlet shape and labeling on your device: this cable fits IEC 320 C15 only. Check the device’s electrical specifications to ensure it operates within 15A/125V and review the manual or rear-panel markings if you’re unsure.

• Inspect the equipment for an IEC 320 C15 inlet marking or a recessed keyed inlet shape
• Verify the device’s maximum current draw does not exceed 15 amps at 125 volts
• If the inlet says C13 or C19, this cable will not fit—order the correct connector type instead

Who this cord is for: technicians, IT managers, and owners of appliances or specialized equipment that explicitly require an IEC 320 C15 inlet will benefit from this Cablelera power cord. It’s intended for straightforward mains power delivery where a C15 connection is specified; it is not a universal replacement for C13 or C19 cords. If you need a different IEC connector or an adapter, choose a cable matched to your device’s inlet type and electrical rating.