AX WABER Full Motion TV Wall Mount 32-85in Dual-Arm

The AX WABER full motion TV wall mount is a heavy-duty, dual-arm bracket that fits most 32–85 inch TVs (up to 132 lbs) and provides tilt, swivel, extension and leveling for flexible viewing.

Engineered for living rooms, home theaters and bedrooms, this full-motion mount supports VESA patterns from 200x100mm up to 600x400mm and accepts standard stud spacings including 8”, 12” and 16” layouts. Built from reinforced steel with pre-labeled hardware bags and clear instructions, it aims to simplify installation while giving you the range of motion needed to reduce glare, save floor space and center your screen properly.

How will this mount change my viewing angles?

You can tilt, swivel and rotate your television so more seats in the room have a good view, and glare from windows or lights is easier to avoid. The dual articulating arms extend the set away from the wall and allow side-to-side adjustment so you don’t compromise picture position.

• +5° / -15° tilt to aim the screen vertically
• ±45° swivel for horizontal repositioning (actual range depends on TV size)
• 16.55" maximum extension and 2.40" retraction for space control
• Built-in leveling adjustments to square the display after mounting

Is this bracket compatible with my TV and wall studs?

The AX WABER mount accommodates most TVs between 32 and 85 inches that use VESA hole patterns from 200x100mm to 600x400mm and that weigh up to 132 pounds. It is designed to fit common stud spacings—8”, 12” and 16”—and includes the hardware needed to secure the unit to wood studs.

• Supports VESA up to 600x400mm and TV weights to 132 lbs
• Compatible with 8", 12" and 16" wood stud layouts
• Instructions advise outermost bolt placement for 16" studs for correct fit
• All mounting nuts, washers and bolts supplied in labeled bags

How difficult is installation and what tools do I need?

The mount ships with all necessary hardware and a detailed instruction sheet to streamline assembly. Typical installation requires common household tools; if your studs are 16" spaced follow the guidance to position bolts in the outer holes on the wall plates for proper alignment.

• Pre-labeled hardware bags reduce sorting time
• Illustrated instructions guide bolt placement for different stud spacings
• No special or proprietary fasteners required — standard tools suffice
• Includes mounting plates, arms, leveling hardware and TV attachment bolts

How does the mount help save space and improve room aesthetics?

The bracket retracts close to the wall when not extended, creating a slim profile, and it pulls out when you need to angle the TV or access rear ports. Hiding cables behind the lowered TV and tucking the screen near the wall both reduce visual clutter and produce a cleaner wall appearance.

• 2.40" low-profile retracted depth keeps TV close to the wall
• 16.55" maximum extension gives room to reach connections
• Dual arms allow flush positioning or angled setups for different rooms
• Sturdy construction keeps the TV stable at any position

Who is this for: The AX WABER Full Motion TV Wall Mount is suited to homeowners, renters (with stud access), and installers who need a robust, flexible mounting solution for medium to large TVs. Choose this bracket if you want wide adjustment range, compatibility with common VESA standards, clear installation guidance and a low-profile look when the screen is pushed back against the wall.