ALITOVE 12V 5A Power Adapter 60W DC LED/CCTV Driver

The ALITOVE 12V 5A (60W) power adapter 2-pack converts 100–240V AC to a stable 12V DC supply for LED strips, CCTV cameras and other 12V devices that draw up to 5 amps.

This dual-pack of ALITOVE AC-to-DC adapters delivers a steady 12V output at up to 5A (60W) per unit, making it a convenient replacement or backup power source for a wide range of small electronics. Each adapter accepts 100–240V AC input and includes common DC barrel plug compatibility; protection features such as over-voltage, over-current, short-circuit and over-temperature safeguards provide layered protection for your equipment. The units meet FCC and CE standards and are intended for indoor use.

Will this adapter power my LED strip or CCTV camera?

Yes, if your device requires 12 volts DC and draws less than or equal to 5 amps, this adapter will provide the necessary power. For continuous reliability, aim to use the adapter at no more than about 80% of its maximum capacity to reduce heat and extend lifespan.

• Suitable for LED strips, CCTV cameras, DVR/NVR systems and audio amplifiers under 60W
• Stable 12V output protects sensitive electronics from voltage swings
• Recommended continuous load: up to ~4A (about 80% of 5A) for longevity
• Indoor-only use — keep away from moisture and extreme temperatures

How do I confirm plug and polarity compatibility?

The adapter ships with a common barrel connector specified as 5.5 x 2.5 mm and is also compatible with 5.5 x 2.1 mm jacks. Before connecting, verify your device's power socket size and polarity marking — this unit uses center positive (inside "+", outside "-").

• Barrel size: 5.5mm outer, 2.5mm inner — fits many 5.5x2.1mm ports
• Polarity: center-positive (inside +, outside −) — confirm with device label
• If unsure, check device manual or measure with a multimeter before connecting
• Do not force incompatible plugs; adapter damage or device failure can occur

What safety protections and certifications are included?

Each ALITOVE adapter includes automatic protection against overloads, over-voltage, over-current, over-temperature and short circuits to reduce risk to connected devices. The units comply with FCC and CE safety standards and follow RoHS environmental restrictions for safer materials.

• Built-in overload and short-circuit protection to shut down under fault conditions
• Over-temperature and over-voltage safeguards to protect both adapter and device
• Meets FCC, CE certifications and RoHS environmental standards
• Designed for indoor electrical environments only

How do I choose the right adapter placement and load management?

Place the adapter in a ventilated area to allow heat to dissipate and avoid stacking multiple power bricks. Match the adapter to devices with combined current draw below the 5A limit for each adapter, and consider using one adapter per device rather than daisy-chaining high-load systems.

• Keep adapters on open surfaces with airflow — avoid enclosed cabinets
• Use separate adapters for high-power devices or distribute load across both units
• Check device current draw labels or specifications before pairing
• Unplug during storms or when not in use for extended periods for added safety

Who is this for? The ALITOVE 12V 5A 60W adapter 2-pack is aimed at hobbyists, installers and homeowners needing reliable indoor power for 12V systems like LED lighting, CCTV, small amplifiers, routers and other electronics under 5A. Choose this kit when you want a cost-effective spare or replacement set with common barrel-plug compatibility, multiple safety protections and wide AC input support for worldwide use.