acbroad 8ft NEMA 1-15P to IEC C9 Power Cord 10A/125V

This acbroad power cord connects legacy devices that accept an IEC 320 C9 female inlet to standard North American wall outlets. Built with SJTW 16AWG, two-conductor cable and molded connectors, it is intended for devices such as older synthesizers, tape machines, sewing machines, and hi-fi gear that require a C9 plug. The cord measures 8 feet (2.5 meters) to give extra reach without excess slack and is manufactured with PVC insulation over pure copper conductors for dependable conductivity.

What devices use an IEC 320 C9 connector?

IEC 320 C9 is uncommon today but remains on many vintage and specialty units. You’ll find it on older musical instruments, some classic audio components, and select sewing machines where the small two-pin inlet fits the device’s form factor.

• Older synths and sequencers (Akai, Roland-era models)
• Vintage tape recorders and hi-fi components (Revox, Marantz)
• Classic sewing machines and small appliance chargers
• Any equipment explicitly listing IEC 320 C9 or "C9" power inlet

How robust is the cord for regular use and occasional outdoor settings?

The cable uses SJTW-rated construction and 16 AWG pure copper conductors, which balances flexibility with durability. SJTW jackets provide resistance to moisture and abrasion better than basic indoor cords, but it’s not a replacement for heavy-duty outdoor extension cables.

• SJTW PVC jacket for improved weather and abrasion resistance
• 16 AWG copper for consistent current flow at up to 10A
• Molded NEMA 1-15P plug reduces stress at the connection point
• UL/CSA (UL CUL) certified components where noted

Is this cord safe to use with my equipment?

Safety depends on matching the plug and the device specifications: voltage, current rating, and inlet type. This cord is rated 10A/125V and designed to fit IEC 320 C9 inlets; verify your device’s label to confirm compatibility before use.

• Rated 10A at 125V—suitable for low- to moderate-draw devices
• Molded connectors to prevent exposed wiring at ends
• Pure copper conductors for reliable electrical performance
• Contact us if you’re unsure whether C9 is the correct connector

Why choose an 8-foot length and what installation tips help tidy the setup?

An 8-foot cable gives room for flexible placement of gear while keeping excess coiling minimal. For neat, safe installation avoid tight coils, secure the cord away from heat sources, and prevent pinch points near desk edges or hinges.

• 8 ft/2.5 m length balances reach and manageability
• Use cable ties or clips to route cords cleanly
• Keep away from sharp edges and direct heat exposure
• Inspect periodically for wear or jacket damage

Who is this for: This acbroad NEMA 1-15P to IEC 320 C9 power cord is aimed at owners of legacy musical instruments, vintage audio gear, sewing machines, and other devices that specify a C9 inlet and operate within a 10A/125V limit. If you need a straightforward, UL-recognized two-prong cable with moderate outdoor durability and an 8-foot reach, this cord provides a reliable, low-profile solution. Reach out to our support team if you need help confirming compatibility for a particular model.