{"product_id":"yotenko-rg58-50ω-coax-cable-49-2-ft-pl259-adapter-kit","title":"YOTENKO RG58 50Ω Coax Cable 49.2 ft PL259 + Adapter Kit","description":"\u003cp\u003e\u003cstrong\u003eYOTENKO’s RG58 50-ohm coax kit pairs a 49.2-foot PL259-terminated cable with four upgraded UHF\/SMA\/BNC adapters for reliable RF connections in CB, ham and two-way radio setups.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit combines a low-loss RG58 coaxial run with heavy-duty PL259 (UHF male) connectors and a set of four versatile adapters (UHF female to SMA male\/SMA female\/UHF male\/BNC male). The cable is built with tinned copper braid, aluminum foil shield and solid copper center conductor, plus extended heat-shrink on the connector boots to improve strain relief and corrosion resistance. It’s intended for antenna feeds, SWR meters, tuners and general RF test and field use where a 50-ohm line and adaptable connector options are needed.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cable maintain signal quality over a 49.2-foot run?\u003c\/h3\u003e\n\u003cp\u003eThe RG58 construction reduces insertion loss while keeping flexibility for routing through vehicles or into a shack. The solid copper core and dense tinned braid shield limit signal leakage, and the aluminum foil layer further isolates the inner conductor from interference.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e50-ohm impedance optimized for HF\/VHF applications\u003c\/li\u003e\n  \u003cli\u003eTinned copper braid + aluminum foil for effective RF shielding\u003c\/li\u003e\n  \u003cli\u003ePVC jacket and PE dielectric for environmental durability\u003c\/li\u003e\n  \u003cli\u003eLow-loss behavior suitable for moderate-range antenna feeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre the PL259 connectors and adapters durable enough for field use?\u003c\/h3\u003e\n\u003cp\u003eYOTENKO upgraded the connectors with improved plating and an extended 6 cm heat-shrink sleeve to reinforce the cable-to-connector transition. The adapters have passed salt-spray testing and are designed to resist corrosion and remain mechanically secure under normal bending and handling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended heat-shrink for better strain relief and pull protection\u003c\/li\u003e\n  \u003cli\u003eSalt spray environmental test verified for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eCrimped connections for consistent mechanical integrity\u003c\/li\u003e\n  \u003cli\u003eAdapter pack expands compatibility without re-terminating the cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich devices and scenarios will this kit work with?\u003c\/h3\u003e\n\u003cp\u003eThis 50-ohm line and adapter set fits a broad range of amateur and mobile radio equipment. Use it for CB and ham antennas, SWR meters, tuners, marine radio installations, portable field days, and as a test lead for analyzers and dummy loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with CB, HF\/VHF ham radios, two-way radios, SWR meters\u003c\/li\u003e\n  \u003cli\u003eAdapters enable connections to SMA, BNC and alternate UHF interfaces\u003c\/li\u003e\n  \u003cli\u003eUseful for antenna analyzers, VNAs, spectrum analyzers and tuners\u003c\/li\u003e\n  \u003cli\u003eWorks in vehicle installs, portable setups and bench testing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and adapt to different rigs?\u003c\/h3\u003e\n\u003cp\u003eThe cable arrives ready with PL259 (UHF male) terminations; adapters convert to other common RF interfaces without soldering. The robust heat-shrink boots and crimped connectors make handling and repeated connect\/disconnect cycles straightforward for home or field technicians.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play PL259 ends for radios and antenna mounts\u003c\/li\u003e\n  \u003cli\u003eFour adapters in the kit remove the need for extra cable runs\u003c\/li\u003e\n  \u003cli\u003eCrimped connectors reduce setup time versus DIY termination\u003c\/li\u003e\n  \u003cli\u003eFlexible jacket eases routing through vehicle and station spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Radio hobbyists, mobile installers, field operators and bench technicians who need a dependable 50-ohm feed line with broad connector compatibility will find this YOTENKO kit useful. It’s well suited for users who value a ready-made coax run with improved connector strain relief and a set of adapters to bridge between PL259 and SMA\/BNC\/UHF interfaces without custom termination.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this RG58 cable for HF and VHF ham bands?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 50-ohm RG58 is suitable for many HF and VHF applications, offering low loss for moderate-length antenna runs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the adapters maintain a secure RF connection?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The included adapters are corrosion-tested and designed for reliable mechanical and RF performance in typical use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOTENKO","offers":[{"title":"Default Title","offer_id":48412780920989,"sku":"B09Q2YB18W","price":35.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/yotenko-coax-front-packaging.jpg?v=1781248486","url":"https:\/\/nexoltic.com\/products\/yotenko-rg58-50%cf%89-coax-cable-49-2-ft-pl259-adapter-kit","provider":"Nexoltic","version":"1.0","type":"link"}