{"product_id":"yookeer-magnetic-zip-tie-mounts-40-pack-22-mm-reusable-magnetic-cable-tie-bases-11-5-lb-hold","title":"Yookeer Magnetic Zip Tie Mounts 40-Pack (22 mm) — Reusable Magnetic Cable Tie Bases, 11.5 lb Hold","description":"\u003cp\u003e\u003cstrong\u003eYookeer magnetic zip tie mount bases are small, reusable magnetic anchors that let you secure cable ties to metal or flat surfaces for cleaner, safer wire routing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese compact 22 mm mounts come in a pack of 40 and combine a magnet, A3 steel backing, rubber pad and nylon components to form a removable anchor point for zip ties. Each magnet holds vertical loads up to roughly 11.5 pounds and is designed for indoor and outdoor organization tasks where a temporary but reliable cable fastening point is useful. They are lightweight, portable and intended to be paired with standard cable ties (ties not included).\u003c\/p\u003e\n\n\u003ch3\u003eHow do these magnetic bases simplify cable management?\u003c\/h3\u003e\n\n\u003cp\u003eThey create stable anchor points without drilling, glue or permanent fasteners, so you can route and secure cables quickly. Magnets allow repositioning as needs change, while a rubber layer improves lateral stability and surface protection.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAttach to steel frames, cabinets or appliances for tidy cable runs.\u003c\/li\u003e\n  \u003cli\u003eUse with nylon zip ties to bunch or anchor wires at any point.\u003c\/li\u003e\n  \u003cli\u003eRemove and relocate mounts without leaving holes or residue.\u003c\/li\u003e\n  \u003cli\u003eReduce trip hazards and strain on connectors by organizing slack.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere and when should I use them for best results?\u003c\/h3\u003e\n\n\u003cp\u003eThey perform best on flat, ferrous (magnetic) surfaces — think metal racks, car chassis, or steel electrical enclosures. Avoid uneven, very rough, or nonmetallic surfaces; use these mounts as temporary to semi-permanent solutions rather than permanent structural supports.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIdeal for workshops, server rooms, garages and shop displays.\u003c\/li\u003e\n  \u003cli\u003eGood for routing lamp leads, USB and power cords or light-duty wiring.\u003c\/li\u003e\n  \u003cli\u003eNot intended for high-temperature areas above 80°C (176°F).\u003c\/li\u003e\n  \u003cli\u003eKeep away from small children and sensitive electronics as a precaution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow strong and durable are the Yookeer magnetic tie mounts?\u003c\/h3\u003e\n\n\u003cp\u003eEach base is built from a magnet and A3 steel with a protective rubber pad, giving a balance of holding power and surface protection. The listed vertical pull capacity is approximately 11.5 pounds, sufficient for most cable and light-hardware anchoring tasks when used correctly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaterials: magnet, A3 steel, rubber pad and nylon components for longevity.\u003c\/li\u003e\n  \u003cli\u003ePull strength: around 11.5 pounds vertical hold per magnet.\u003c\/li\u003e\n  \u003cli\u003eTemperature note: magnets may demagnetize above about 80°C (176°F).\u003c\/li\u003e\n  \u003cli\u003eQuantity: 40 bases per pack for multi-point organization projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are practical tips for installing and using the mounts?\u003c\/h3\u003e\n\n\u003cp\u003ePlacement is quick: press the base onto a compatible metal surface, thread a zip tie through the mount, loop it around the cable bundle and tighten. Trim the excess tie and adjust or move the magnetic base as your setup evolves.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eClean the mounting surface for maximum magnet contact and grip.\u003c\/li\u003e\n  \u003cli\u003ePosition mounts on flat sections of metal to maintain full suction.\u003c\/li\u003e\n  \u003cli\u003eCombine multiple mounts to distribute heavier loads along runs.\u003c\/li\u003e\n  \u003cli\u003eRemember: zip ties are not included in the package.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Yookeer magnetic zip tie mount pack suits DIYers, tradespeople, IT technicians and homeowners who need flexible cable routing without permanent modification. If you want a removable, low-impact way to secure wires, manage cords in workshops, vehicles, servers or retail displays, these 22 mm magnetic bases give you a portable, cost-effective anchoring option. They’re especially useful when you need many attachment points at once — the 40-piece set covers multiple projects and future changes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the mounts include zip ties?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the pack contains 40 magnetic bases only; standard zip ties must be purchased separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these mounts be used on nonmetal surfaces?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They work best on flat ferrous metal; nonmetal surfaces reduce holding power and are not recommended.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yookeer","offers":[{"title":"Default Title","offer_id":48444416884893,"sku":"B0FK4B4SGY","price":64.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/yookeer-front-packaging-mounts.jpg?v=1781543102","url":"https:\/\/nexoltic.com\/products\/yookeer-magnetic-zip-tie-mounts-40-pack-22-mm-reusable-magnetic-cable-tie-bases-11-5-lb-hold","provider":"Nexoltic","version":"1.0","type":"link"}