{"product_id":"vanaux-optical-audio-splitter-1x2-toslink-spdif","title":"VANAUX Optical Audio Splitter 1x2 Toslink SPDIF","description":"\u003cp\u003e\u003cstrong\u003eThe VANAUX Optical Audio Splitter is a compact 1-input to 2-output Toslink adapter that duplicates a single SPDIF optical feed so you can drive two digital audio devices at once.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you need to feed both a soundbar and an AV receiver from one digital source or want to switch between two sources and one display, this VANAUX 1-in-2 optical splitter gives a simple, low-latency solution for digital audio routing. It supports LPCM and common surround formats and is built with protective caps and gold-plated connectors for consistent signal transfer.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this splitter handle different audio devices?\u003c\/h3\u003e\n\n\u003cp\u003eThe VANAUX splitter works with most devices that use a Toslink\/SPDIF optical connection — gaming consoles, Blu-ray players, TV optical outs, and many receivers or soundbars. When used as 1-in\/2-out, the unit concurrently sends the same digital stream to both outputs. When used reversed (2-in\/1-out), only one input can be active at a time, so it functions as a manual selector rather than a mixer.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSupports LPCM, Dolby Digital and DTS family formats commonly carried over Toslink\u003c\/li\u003e\n  \u003cli\u003eCompatible with TVs, consoles, Blu-ray players, receivers, and soundbars\u003c\/li\u003e\n  \u003cli\u003e1→2 mode duplicates one source to two sinks simultaneously\u003c\/li\u003e\n  \u003cli\u003e2→1 mode accepts two sources but only one will transmit at once\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill I lose audio quality when splitting the optical signal?\u003c\/h3\u003e\n\n\u003cp\u003eNo active conversion occurs inside the passive splitter, so the digital pulse remains intact across both outputs when supported by your devices. Build quality — including gold-plated contacts and a protective braided jacket — helps maintain signal integrity and reduces the chance of intermittent drops compared with cheap plastic connectors.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e24K gold-plated connectors reduce corrosion and improve contact reliability\u003c\/li\u003e\n  \u003cli\u003eFiber-optic signal passes digitally, avoiding analog degradation\u003c\/li\u003e\n  \u003cli\u003eDurable braided jacket resists kinks that can interrupt signal path\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I set it up in my home theater or game room?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is plug-and-play: plug the source’s Toslink cable into the splitter input and run optical cables from the splitter outputs to your two destination devices. If you instead connect two sources to the splitter inputs, select the active source on the sending device because only one input will be heard by the output at a time. Keep protective dust caps on unused ports to preserve connector condition.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePlug source into the single male input, then connect two outputs to receivers\/soundbars\u003c\/li\u003e\n  \u003cli\u003eWhen using two inputs, power only the device you want to transmit\u003c\/li\u003e\n  \u003cli\u003eStore or use rubber dust caps to keep ports clean when idle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and design features help it last?\u003c\/h3\u003e\n\n\u003cp\u003eThe VANAUX splitter combines a flexible braided jacket, corrosion-resistant gold plating, and rubber dust covers to extend lifetime in everyday setups. These elements reduce wear where cables bend and ensure a snug connector fit, minimizing signal interruptions in frequently changed AV racks or entertainment centers.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBraided outer jacket for kink resistance and extra flexibility\u003c\/li\u003e\n  \u003cli\u003eGold-plated connectors for longer-term corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eProtective rubber caps keep optical ports clean when unused\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This VANAUX optical splitter is ideal for homeowners, gamers, and AV hobbyists who need a straightforward way to send one digital audio source to two devices or to alternate two sources into a single input. If you run a home theater, a multi-room audio setup, or want a simple audio routing tool for a console and soundbar, this compact Toslink splitter provides an affordable, low-maintenance option without signal conversion or complicated configuration.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this splitter to send audio to two speakers at once?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. In 1-input to 2-output mode it duplicates the optical stream so two devices receive the same digital audio simultaneously.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will both inputs work if I connect two sources to the splitter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. When used as 2-input to 1-output only one source can transmit at a time; it does not mix signals.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VANAUX","offers":[{"title":"Default Title","offer_id":48449255735453,"sku":"B0D3KZ23FR","price":22.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/vanaux-front-view-splitter.jpg?v=1781630205","url":"https:\/\/nexoltic.com\/products\/vanaux-optical-audio-splitter-1x2-toslink-spdif","provider":"Nexoltic","version":"1.0","type":"link"}