{"product_id":"tupavco-gigabit-ethernet-surge-protector-poe-tp302","title":"Tupavco Gigabit Ethernet Surge Protector PoE++ TP302","description":"\u003cb\u003eThe Tupavco TP302 is a Gigabit Ethernet surge protector built to defend PoE and non‑PoE network links from lightning and transient surges while passing full Gigabit speed and up to 154W PoE++ power.\u003c\/b\u003e\n\n\u003cp\u003eIf you run outdoor cameras, PoE switches, routers or long Ethernet drops, the TP302 provides coordinated surge protection designed for IEEE 802.3 af\/at\/bt PoE modes and high‑power PoE++ lines. Housed in a rugged aluminum enclosure with mounting flanges and a heavy ground lead, it uses gas discharge tubes (GDT) and bidirectional clamping to divert large transient energy away from delicate network equipment without degrading 1000 Mbps signals.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the TP302 protect my Ethernet devices from lightning and surges?\u003c\/h3\u003e\n\u003cp\u003eThe TP302 combines gas discharge tubes with line‑to‑line and line‑to‑ground clamping to arrest high‑energy transients up to 20 kA (8\/20 μs). It’s designed to react quickly to surge events and route destructive currents to earth ground instead of your connected electronics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e20 kA (8\/20 μs) surge capacity for strong transient events\u003c\/li\u003e\n  \u003cli\u003eGDT technology for high‑energy lightning suppression\u003c\/li\u003e\n  \u003cli\u003eBidirectional clamping protects both polarities on differential pairs\u003c\/li\u003e\n  \u003cli\u003e12 AWG ground wire for low impedance path to earth\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the TP302 work with PoE, PoE+ and PoE++ systems?\u003c\/h3\u003e\n\u003cp\u003eYes — the TP302 supports IEEE 802.3 af\/at\/bt power delivery and both Mode A and Mode B wiring, so it passes data and PoE up to PoE++ levels. It is specified to handle PoE currents of 1.6 A on two pairs and 3.2 A on four pairs, enabling up to 154 W at 48 V for high‑power devices.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with PoE, PoE+ and PoE++ (IEEE 802.3 af\/at\/bt)\u003c\/li\u003e\n  \u003cli\u003eMode A and Mode B supported for flexible wiring\u003c\/li\u003e\n  \u003cli\u003eRated 3.2 A across 4 pairs, up to 154 W (48 V max)\u003c\/li\u003e\n  \u003cli\u003eMaintains Gigabit (1000 Mbps) data throughput\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I mount and connect the surge protector in my network?\u003c\/h3\u003e\n\u003cp\u003eThe TP302 comes in an aluminum housing with integrated mounting flanges and a 12 AWG ground lead so you can fasten it to a wall, panel, or rack and attach a robust earth connection. Install it at the network boundary: between the external cable run and your internal switch, camera, or router.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum case for durability and heat dissipation\u003c\/li\u003e\n  \u003cli\u003eMounting flanges for screw attachment to wall, panel or rack\u003c\/li\u003e\n  \u003cli\u003e12 AWG ground wire for reliable grounding\u003c\/li\u003e\n  \u003cli\u003eRJ45 in\/out connections for inline installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat network performance can I expect after installation?\u003c\/h3\u003e\n\u003cp\u003eThe TP302 is engineered to preserve Ethernet signal integrity so you keep full Gigabit performance while benefiting from surge protection. Its internal components are chosen to minimize insertion loss and not impede PoE voltage or current reach to powered devices.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for 1000 Mbps Gigabit Ethernet\u003c\/li\u003e\n  \u003cli\u003eMinimal impact on link quality or PoE delivery\u003c\/li\u003e\n  \u003cli\u003eWorks with CAT5e\/CAT6 cable runs and standard RJ45 connectors\u003c\/li\u003e\n  \u003cli\u003eDesigned for both data integrity and high transient suppression\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Tupavco TP302 is intended for network installers, security camera integrators, telecom technicians and IT pros who need robust surge defense on outdoor or vulnerable Ethernet runs, especially where PoE++ devices require both high power and reliable protection. It’s useful for protecting switches, NVRs, routers, PoE injectors and cameras on rooftop, pole or perimeter deployments where lightning and transient surges are a risk.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the TP302 handle PoE++ devices drawing 100+ watts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The TP302 supports up to 3.2 A on four pairs and a maximum of 154 W (48 V) for PoE++ devices.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a special ground to use this surge protector?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a solid earth ground; the TP302 includes a 12 AWG ground lead for low‑impedance connection to grounding systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Tupavco","offers":[{"title":"Default Title","offer_id":48413421535389,"sku":"B00805VUD8","price":48.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/tupavco-tp302-front-panel.jpg?v=1781264742","url":"https:\/\/nexoltic.com\/products\/tupavco-gigabit-ethernet-surge-protector-poe-tp302","provider":"Nexoltic","version":"1.0","type":"link"}