{"product_id":"sonoreboom-heat-shrink-braided-sleeving-3-8-32-ft","title":"Sonoreboom Heat Shrink Braided Sleeving 3\/8\" (32 ft)","description":"\u003cp\u003e\u003cstrong\u003eSonoreboom 2-in-1 Heat Shrink Braided Sleeving is a flexible, abrasion-resistant fabric tubing that halves its inner diameter when heated to neatly protect irregular-shaped hoses, cables, and wire bundles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis braided heat-shrink sleeve arrives as a long, woven fabric tube engineered to conform to odd shapes and tighten around assemblies when exposed to heat. Before shrinking it remains pliable for easy routing and bundling; after heating with a heat gun it compresses to a denser, more protective jacket. The sleeve’s woven construction promotes heat dissipation and resists wear, so it’s suited for wiring runs, hydraulic hoses, and exposed cable clusters where both fit and durability matter.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 2-in-1 ratio improve fit on irregular shapes?\u003c\/h3\u003e\n\u003cp\u003eThe sleeving is designed to reduce its inner diameter by roughly half, transforming a loose-fit sleeve into a snug, tailored cover that molds to uneven profiles. This allows the same tube to accommodate a range of diameters before and after shrinking.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInitial inner diameter: 3\/8\" (10 mm) for easy installation.\u003c\/li\u003e\n  \u003cli\u003ePost-shrink inner diameter: approximately 3\/16\" for a tight fit.\u003c\/li\u003e\n  \u003cli\u003eLength: 32 ft continuous for long runs or multiple cut pieces.\u003c\/li\u003e\n  \u003cli\u003eWoven strands tighten to trap and protect irregular shapes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat level of abrasion and heat resistance can I expect?\u003c\/h3\u003e\n\u003cp\u003eThe braided fabric is built with thick, tightly woven strands that deliver substantial abrasion resistance once the sleeve has been shrunk. The open weave assists heat dissipation to reduce hot spots, making it a practical choice where temperatures can climb.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTight woven construction increases surface toughness after shrinking.\u003c\/li\u003e\n  \u003cli\u003eFabric structure allows faster heat dissipation than solid sleeves.\u003c\/li\u003e\n  \u003cli\u003eMaintains flexibility before heat application for routing through tight areas.\u003c\/li\u003e\n  \u003cli\u003eGood for environments with mechanical wear or occasional elevated temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and heat this braided shrink tubing?\u003c\/h3\u003e\n\u003cp\u003eInstall the sleeve over cables or hoses while it’s at full width, then apply even heat with a heat gun until the weave tightens and the length shortens. Trim any stray threads and measure before cutting to avoid running short on length.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended tool: handheld heat gun for even shrinkage.\u003c\/li\u003e\n  \u003cli\u003eEvenly pass heat along the length to prevent hotspots and gaps.\u003c\/li\u003e\n  \u003cli\u003eTrim frayed thread ends with scissors prior to final fit.\u003c\/li\u003e\n  \u003cli\u003eMeasure twice and cut once — 32 ft total allows multiple sections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this sleeve work for small bundles or single wires?\u003c\/h3\u003e\n\u003cp\u003eYes — because it starts at a relatively small inner diameter and shrinks to half, it’s suitable for single cable runs and small hose bundles where a tight, protective jacket is needed. The fabric holds its shape and provides a neat, professional finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInitial 3\/8\" inner diameter fits many individual cables and small hoses.\u003c\/li\u003e\n  \u003cli\u003ePost-shrink 3\/16\" delivers a secure clamping fit around small bundles.\u003c\/li\u003e\n  \u003cli\u003eFlexible pre-shrink weave simplifies routing through panels and clamps.\u003c\/li\u003e\n  \u003cli\u003e32 ft roll covers multiple uses or long harness sections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Sonoreboom’s braided heat-shrink sleeve is aimed at electricians, auto technicians, marine and RV DIYers, industrial maintenance staff, and hobbyists who need a durable, low-profile protective cover that conforms to irregular shapes. Choose this sleeve when you need a combination of easy installation, strong abrasion resistance after shrinking, and a woven construction that helps manage heat and moisture in demanding installations.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tools do I need to shrink this braided sleeving?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A handheld heat gun is recommended for even shrinkage; scissors to trim threads. Avoid direct open flame for best results.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the sleeve handle outdoor or automotive environments?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the woven, abrasion-resistant fabric and heat-dissipating structure suit automotive, marine, and outdoor applications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sonoreboom","offers":[{"title":"Default Title","offer_id":48412792062109,"sku":"B0BWMWM5SD","price":41.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/sonoreboom-front-packaging-sleeving.jpg?v=1781248812","url":"https:\/\/nexoltic.com\/products\/sonoreboom-heat-shrink-braided-sleeving-3-8-32-ft","provider":"Nexoltic","version":"1.0","type":"link"}