{"product_id":"sonoreboom-braided-heat-shrink-sleeving-1-2-22ft","title":"Sonoreboom Braided Heat-Shrink Sleeving 1\/2\" 22ft","description":"\u003cp\u003e\u003cstrong\u003eSonoreboom 2-in-1 braided heat-shrink sleeving is a flexible fabric tubing that halves down to protect and tidy irregular hoses, cables and wire bundles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis lightweight, woven shrink sleeve delivers abrasion resistance and a neat finish for wiring runs where standard tubing won’t conform. Before heating it slips easily over connectors and looser bundles; after even heat application with a heat gun the braid contracts to a denser, tougher cover that resists wear while allowing heat dissipation. The roll provides 22 feet of 1\/2\" (12 mm) initial inner diameter sleeve, shrinking to about 1\/4\" (6 mm) to fit smaller or irregular shapes.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this braided heat-shrink sleeve improve cable organization?\u003c\/h3\u003e\n\u003cp\u003eThe Sonoreboom sleeve groups loose wires and hoses into a tidy, continuous wrap that reduces tangling and creates a professional appearance. Its woven structure compresses around varied shapes for a secure hold without rigid clamping.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConverts messy bundles into one neat run\u003c\/li\u003e\n  \u003cli\u003eAccommodates irregular shapes better than solid tubing\u003c\/li\u003e\n  \u003cli\u003e22 ft length covers long cable runs or multiple short segments\u003c\/li\u003e\n  \u003cli\u003eShrinks from 1\/2\" to roughly 1\/4\" for a snug fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it protect cords from abrasion and heat buildup?\u003c\/h3\u003e\n\u003cp\u003eYes — the dense braided weave increases abrasion resistance after shrinking while the fabric construction allows heat to dissipate rather than trap it. That makes it a practical choice where cables run near heat sources or in constrained spaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTight woven strands resist chafing and cuts\u003c\/li\u003e\n  \u003cli\u003eMaintains flexibility before and after shrinkage\u003c\/li\u003e\n  \u003cli\u003eBreathable braid helps prevent localized heat accumulation\u003c\/li\u003e\n  \u003cli\u003eDurable after shrinking for longer service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the Sonoreboom fabric shrink tubing correctly?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: slide the sleeve over the wire or hose, then apply even heat with a heat gun until the braid uniformly contracts and thickens. Trim any stray fibers at the ends and measure ahead to ensure you have enough coverage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure needed length before cutting from the 22 ft roll\u003c\/li\u003e\n  \u003cli\u003eSlide sleeve in place while fabric is relaxed\u003c\/li\u003e\n  \u003cli\u003eUse an even, sweeping motion with a heat gun for consistent shrinkage\u003c\/li\u003e\n  \u003cli\u003eTrim frayed threads at ends with scissors after cooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and materials should I expect from this product?\u003c\/h3\u003e\n\u003cp\u003eThe product comes as a 22-foot length of braided fabric tubing with a flat width equivalent to a 7\/8\" lay and an inner diameter of 1\/2\" prior to shrinkage. After heating it contracts to an inner diameter near 1\/4\", providing a tight, protective layer over smaller cables and irregular assemblies.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlat width: 7\/8\" (pre-shrink geometry)\u003c\/li\u003e\n  \u003cli\u003eInner diameter before shrink: 1\/2\" (12 mm)\u003c\/li\u003e\n  \u003cli\u003eInner diameter after shrink: ~1\/4\" (6 mm)\u003c\/li\u003e\n  \u003cli\u003eLength: 22 ft total on the roll\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Sonoreboom 2-in-1 braided heat-shrink sleeve suits electricians, DIYers, audio\/video installers, automotive and marine hobbyists, and anyone who needs a flexible protective wrap that conforms to irregular shapes. If you need to bundle and safeguard cables without bulky rigid tubing, or you want a breathable sleeve that resists abrasion and stays neat after heat shrinkage, this product is a practical, cost-effective solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What temperature and tool are needed to shrink this braided sleeve?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a heat gun and apply even, sweeping heat until the braid contracts; avoid open flames for best results.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this sleeving fit irregular-shaped hoses and cable bundles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It shrinks to roughly half the inner diameter to conform tightly around uneven shapes and multiple wires.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sonoreboom","offers":[{"title":"Default Title","offer_id":48412792094877,"sku":"B0BWMWYY49","price":34.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/sonoreboom-front-packaging-view.jpg?v=1781248812","url":"https:\/\/nexoltic.com\/products\/sonoreboom-braided-heat-shrink-sleeving-1-2-22ft","provider":"Nexoltic","version":"1.0","type":"link"}