{"product_id":"saireed-8ft-figure-8-power-cord-for-hp-envy-printers","title":"Saireed 8ft Figure-8 Power Cord for HP Envy Printers","description":"\u003cp\u003e\u003cstrong\u003eSaireed's 8-foot figure‑8 power cord replaces or extends the two‑prong AC cable for HP Envy all‑in‑one printers, restoring reliable power connection with a durable IEC C7 to NEMA 1-15P lead.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your HP Envy printer or other compatible device has a frayed, lost, or short power cord, this Saireed replacement cable provides a straightforward swap. The cable uses the common figure‑8 (IEC C7) connector to plug into the printer and a standard two‑prong plug for the wall. At 8 feet (2.5 meters) the cord gives extra reach for better placement behind furniture or across larger desks without relying on extension adapters.\u003c\/p\u003e\n\n\u003ch3\u003eWill this cord fit my HP Envy printer models?\u003c\/h3\u003e\n\u003cp\u003eYes — the Saireed cord is built to the IEC C7 (figure‑8) standard used by many HP Envy all‑in‑one printers. It’s a non‑polarized, two‑prong lead compatible with the models listed below and other devices that accept a C7 inlet. Always confirm your device uses a figure‑8 inlet before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with HP Envy models such as 6455, 6420, 6458, 6452, 6475, and many 4500\/5000\/5500 series units.\u003c\/li\u003e\n  \u003cli\u003eFits printers like Photo 7155, 7855, and other devices with IEC C7 sockets.\u003c\/li\u003e\n  \u003cli\u003eWorks for electronics needing 125V, 10A (or 7A) non‑polarized figure‑8 power leads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe is this replacement cable?\u003c\/h3\u003e\n\u003cp\u003eThe cable is manufactured to common safety and durability expectations for consumer AC leads. It uses 18 AWG wiring inside a flexible jacket and standard molded plugs at both ends. While not a medical or industrial grade cord, it is suitable for home and office printers and electronics when used normally.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e18 AWG conductor for typical printer power loads and everyday use.\u003c\/li\u003e\n  \u003cli\u003eMolded IEC C7 connector for a snug connection to your device socket.\u003c\/li\u003e\n  \u003cli\u003eRated for 125V and up to 10A or 7A depending on device requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat length and package details come with the cord?\u003c\/h3\u003e\n\u003cp\u003eThis Saireed lead measures approximately 8 feet (2.5 meters), giving extra allowance to reach distant outlets or route neatly behind furniture. Each purchase includes a single power cord; no adapter or additional accessories are provided. The cable is ready to use straight from the box—just plug into the printer and wall outlet.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne 8‑foot (2.5 meter) figure‑8 (IEC C7) to NEMA 1‑15P power cord per package.\u003c\/li\u003e\n  \u003cli\u003eNon‑polarized two‑prong wall plug compatible with standard U.S. outlets.\u003c\/li\u003e\n  \u003cli\u003eSimple plug‑and‑play replacement — no tools required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I choose this cord instead of other cables or extensions?\u003c\/h3\u003e\n\u003cp\u003ePick this Saireed cord when you need a direct replacement or slightly longer reach without adding adapters that can clutter connections. It preserves the original connection type (figure‑8) and eliminates reliance on multi‑connectors that may introduce loose contacts. If your device requires a grounded plug (three‑prong) then select a different cable matching that inlet.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal when the original two‑prong cable is lost, damaged, or too short.\u003c\/li\u003e\n  \u003cli\u003eAvoids using improvised or mismatched adapters that can stress plugs.\u003c\/li\u003e\n  \u003cli\u003eChoose a three‑prong grounded cord instead if your device has a grounded inlet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Saireed 8ft figure‑8 power cord is designed for home and small‑office users with HP Envy and other devices that accept an IEC C7 inlet and a standard two‑prong outlet. It’s useful for anyone who needs a reliable replacement cable, extra length for flexible placement, or a simple spare to keep on hand. Not suitable for devices requiring a grounded (three‑prong) connection or special voltage\/amperage beyond typical printer needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this cord compatible with HP Envy 6455?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Saireed 8ft figure‑8 cord fits HP Envy 6455 and other Envy models that use an IEC C7 inlet.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the cable include a ground pin?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This is a non‑polarized two‑prong (IEC C7 to NEMA 1‑15P) power cord without a ground pin.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Saireed","offers":[{"title":"Default Title","offer_id":48412946661533,"sku":"B07ZM9QW2H","price":16.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9596\/1757\/files\/saireed-front-packaging-figure8-power-cord.jpg?v=1781253339","url":"https:\/\/nexoltic.com\/products\/saireed-8ft-figure-8-power-cord-for-hp-envy-printers","provider":"Nexoltic","version":"1.0","type":"link"}